Effect of ECAP on fracture toughness and fatigue endurance of DED-processed Ti-6Al-4V investigated on miniaturized specimens
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26316919%3A_____%2F23%3AN0000054" target="_blank" >RIV/26316919:_____/23:N0000054 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.sciencedirect.com/science/article/abs/pii/S0925838823034709?via%3Dihub" target="_blank" >https://www.sciencedirect.com/science/article/abs/pii/S0925838823034709?via%3Dihub</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1016/j.jallcom.2023.172167" target="_blank" >10.1016/j.jallcom.2023.172167</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Effect of ECAP on fracture toughness and fatigue endurance of DED-processed Ti-6Al-4V investigated on miniaturized specimens
Popis výsledku v původním jazyce
Additive manufacturing (AM) has revolutionised the production of complex components with custom mechanical properties. However, as-deposited AM-ed materials often exhibit inferior mechanical behaviour compared to conventionally manufactured counterparts because of defects generated during the deposition. In this study, the effects of equal channel angular pressing (ECAP) on fracture toughness and fatigue endurance of Ti-6Al-4V titanium alloy manufactured by direct energy deposition (DED) are investigated. The aim of this study is to compare the mechanical performance of the material in the as-deposited and ECAP-ed states, exploiting the potential benefits of ECAP in improving the properties of additively manufactured components. ECAP processing is used to induce severe plastic deformation (SPD) and create a unique microstructure in Ti-6Al-4V specimens. As-deposited and ECAP-ed specimens were evaluated using stress intensity factor (SIF) analysis, fatigue crack growth, and high cycle fatigue tests using miniaturized specimens. Fractographic analysis was performed using scanning electron microscopy (SEM) to examine the fracture surfaces and identify the underlying failure mechanisms. The results revealed that while ECAP led to a slight increase in porosity, it significantly reduced fracture toughness and had a negligible effect on the rate of propagation of fatigue cracks. In addition, the ECAPed specimens showed reduced fatigue endurance of the material.
Název v anglickém jazyce
Effect of ECAP on fracture toughness and fatigue endurance of DED-processed Ti-6Al-4V investigated on miniaturized specimens
Popis výsledku anglicky
Additive manufacturing (AM) has revolutionised the production of complex components with custom mechanical properties. However, as-deposited AM-ed materials often exhibit inferior mechanical behaviour compared to conventionally manufactured counterparts because of defects generated during the deposition. In this study, the effects of equal channel angular pressing (ECAP) on fracture toughness and fatigue endurance of Ti-6Al-4V titanium alloy manufactured by direct energy deposition (DED) are investigated. The aim of this study is to compare the mechanical performance of the material in the as-deposited and ECAP-ed states, exploiting the potential benefits of ECAP in improving the properties of additively manufactured components. ECAP processing is used to induce severe plastic deformation (SPD) and create a unique microstructure in Ti-6Al-4V specimens. As-deposited and ECAP-ed specimens were evaluated using stress intensity factor (SIF) analysis, fatigue crack growth, and high cycle fatigue tests using miniaturized specimens. Fractographic analysis was performed using scanning electron microscopy (SEM) to examine the fracture surfaces and identify the underlying failure mechanisms. The results revealed that while ECAP led to a slight increase in porosity, it significantly reduced fracture toughness and had a negligible effect on the rate of propagation of fatigue cracks. In addition, the ECAPed specimens showed reduced fatigue endurance of the material.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20501 - Materials engineering
Návaznosti výsledku
Projekt
—
Návaznosti
I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace
Ostatní
Rok uplatnění
2023
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
JOURNAL OF ALLOYS AND COMPOUNDS
ISSN
0925-8388
e-ISSN
1873-4669
Svazek periodika
968
Číslo periodika v rámci svazku
DEC 15 2023
Stát vydavatele periodika
CH - Švýcarská konfederace
Počet stran výsledku
10
Strana od-do
nestránkováno
Kód UT WoS článku
001083723000001
EID výsledku v databázi Scopus
2-s2.0-85171878126