Characteristics and Liquid Metal Embrittlement of the steel T91 in contact with Lead-Bismuth Eutectic
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F26722445%3A_____%2F16%3AN0000025" target="_blank" >RIV/26722445:_____/16:N0000025 - isvavai.cz</a>
Výsledek na webu
<a href="http://dx.doi.org/10.1016/j.jnucmat.2015.08.048" target="_blank" >http://dx.doi.org/10.1016/j.jnucmat.2015.08.048</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1016/j.jnucmat.2015.08.048" target="_blank" >10.1016/j.jnucmat.2015.08.048</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Characteristics and Liquid Metal Embrittlement of the steel T91 in contact with Lead-Bismuth Eutectic
Popis výsledku v původním jazyce
This paper summarizes results of the work carried out on the evaluation of the susceptibility to LME (Liquid Metal Embrittlement) of the ferritic/martensitic steel T91 in contact with LBE (Lead-Bismuth Eutectic). The influence of LBE on the fracture toughness of the steel was studied using 0.5T CT specimen at 355 degrees C, pre-cracked by cyclic loading in the liquid metal. Tests were carried out in well-defined conditions and according to ASTM standard. It was observed that the LBE decreased the apparent fracture toughness, J(IC), by more than 30%, compared to the value in air. The results are discussed based on examinations of the fracture surface evidencing LME occurrence. The stretch zone accompanying the pre-crack tip blunting was not observed in the specimens exhibiting LME. Therefore, a new fracture toughness, J(map), determined as J integral at the maximum applied load, is proposed to be the appropriate value for fracture resistance evaluation in LBE. The Jmap can be applied for the assessment of a preexisting LME crack stability.
Název v anglickém jazyce
Characteristics and Liquid Metal Embrittlement of the steel T91 in contact with Lead-Bismuth Eutectic
Popis výsledku anglicky
This paper summarizes results of the work carried out on the evaluation of the susceptibility to LME (Liquid Metal Embrittlement) of the ferritic/martensitic steel T91 in contact with LBE (Lead-Bismuth Eutectic). The influence of LBE on the fracture toughness of the steel was studied using 0.5T CT specimen at 355 degrees C, pre-cracked by cyclic loading in the liquid metal. Tests were carried out in well-defined conditions and according to ASTM standard. It was observed that the LBE decreased the apparent fracture toughness, J(IC), by more than 30%, compared to the value in air. The results are discussed based on examinations of the fracture surface evidencing LME occurrence. The stretch zone accompanying the pre-crack tip blunting was not observed in the specimens exhibiting LME. Therefore, a new fracture toughness, J(map), determined as J integral at the maximum applied load, is proposed to be the appropriate value for fracture resistance evaluation in LBE. The Jmap can be applied for the assessment of a preexisting LME crack stability.
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JF - Jaderná energetika
OECD FORD obor
—
Návaznosti výsledku
Projekt
Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2016
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Journal of Nuclear Materials
ISSN
0022-3115
e-ISSN
—
Svazek periodika
472
Číslo periodika v rámci svazku
April
Stát vydavatele periodika
NL - Nizozemsko
Počet stran výsledku
8
Strana od-do
163-170
Kód UT WoS článku
000373489700021
EID výsledku v databázi Scopus
—