Fixation of reinforcing fabric for ion exchange membrane
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F28676092%3A_____%2F18%3AN0000090" target="_blank" >RIV/28676092:_____/18:N0000090 - isvavai.cz</a>
Výsledek na webu
<a href="http://strutex.ft.tul.cz/2018/Home/home.html" target="_blank" >http://strutex.ft.tul.cz/2018/Home/home.html</a>
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Fixation of reinforcing fabric for ion exchange membrane
Popis výsledku v původním jazyce
A reinforcing fabric is an integral part of heterogeneous ion exchange membranes (IEMs). It guarantees the mechanical resistance of IEMs. Thermal fixation of the fabric is one of the most important refining operations, which is also reflected in the production of IEMs during lamination on heated cylinders. The influence of the fixation temperature (grey variant, 120, 160 and 215 °C) of the Ulester 31HDA polyester fabric with a twill weave on the production of IEMs was studied. DSC, iodine sorption value measurement, or dimensional stability during the additional heat load were studied for commercially supplied fabrics Ulester 31HDA. The values were compared with the model series of fabrics prepared in laboratory drying under precisely defined conditions (temperature and time). The principle of fixation is the rearrangement of the internal fiber structure associated with the change of the crystalline phase. The reinforcing fabric is dimensionally stable up to the fixation temperature. Iodine sorption value decreased with the increasing temperature of fixation. Any changes were not seen from SEM images or density measurements. DSC analysis did not show the predicted dependence for the model series of fabric. Dimensional changes after temperature loading increased with temperature.
Název v anglickém jazyce
Fixation of reinforcing fabric for ion exchange membrane
Popis výsledku anglicky
A reinforcing fabric is an integral part of heterogeneous ion exchange membranes (IEMs). It guarantees the mechanical resistance of IEMs. Thermal fixation of the fabric is one of the most important refining operations, which is also reflected in the production of IEMs during lamination on heated cylinders. The influence of the fixation temperature (grey variant, 120, 160 and 215 °C) of the Ulester 31HDA polyester fabric with a twill weave on the production of IEMs was studied. DSC, iodine sorption value measurement, or dimensional stability during the additional heat load were studied for commercially supplied fabrics Ulester 31HDA. The values were compared with the model series of fabrics prepared in laboratory drying under precisely defined conditions (temperature and time). The principle of fixation is the rearrangement of the internal fiber structure associated with the change of the crystalline phase. The reinforcing fabric is dimensionally stable up to the fixation temperature. Iodine sorption value decreased with the increasing temperature of fixation. Any changes were not seen from SEM images or density measurements. DSC analysis did not show the predicted dependence for the model series of fabric. Dimensional changes after temperature loading increased with temperature.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
—
OECD FORD obor
20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)
Návaznosti výsledku
Projekt
<a href="/cs/project/LO1418" target="_blank" >LO1418: Progresivní rozvoj Membránového inovačního centra</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2018
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
Conference Book - STRUTEX 2018
ISBN
978-80-7494-430-7
ISSN
—
e-ISSN
—
Počet stran výsledku
8
Strana od-do
225-232
Název nakladatele
Technická univerzita v Liberci
Místo vydání
Liberec
Místo konání akce
Liberec
Datum konání akce
6. 12. 2018
Typ akce podle státní příslušnosti
EUR - Evropská akce
Kód UT WoS článku
—