SEM and EDS Analysis Used in Evaluation of Chemical Pre-treatment Based on Nanotechnology

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F44555601%3A13420%2F14%3A43886206" target="_blank" >RIV/44555601:13420/14:43886206 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

SEM and EDS Analysis Used in Evaluation of Chemical Pre-treatment Based on Nanotechnology

Popis výsledku v původním jazyce

The most important aim of chemical pre-treatment is the removal of contaminants, corrosion products etc. from the material surface and obtaining such a basic material surface, which will provide sufficient corrosion resistance of the base material and suitable conditions for the adhesion of paints or other finish coatings to steel material. When selecting the method of chemical pre-treatment of the base material surface it should be considered whether the degree of preparation provides the required level of cleanliness of the surface and also the surface roughness and surface profile for the coating to be applied to the base material after chemical pretreatment. The paper focuses on SEM and EDS analysis used in evaluation of chemical pre-treatment based on nanotechnology. These chemical pre-treatments are excluded on low carbon steel sheet. On the surface of low carbon steel sheet were excluded coatings of chemical pre-treatments (Fe phosphate, coating based on nanotechnology) and has

Název v anglickém jazyce

SEM and EDS Analysis Used in Evaluation of Chemical Pre-treatment Based on Nanotechnology

Popis výsledku anglicky

The most important aim of chemical pre-treatment is the removal of contaminants, corrosion products etc. from the material surface and obtaining such a basic material surface, which will provide sufficient corrosion resistance of the base material and suitable conditions for the adhesion of paints or other finish coatings to steel material. When selecting the method of chemical pre-treatment of the base material surface it should be considered whether the degree of preparation provides the required level of cleanliness of the surface and also the surface roughness and surface profile for the coating to be applied to the base material after chemical pretreatment. The paper focuses on SEM and EDS analysis used in evaluation of chemical pre-treatment based on nanotechnology. These chemical pre-treatments are excluded on low carbon steel sheet. On the surface of low carbon steel sheet were excluded coatings of chemical pre-treatments (Fe phosphate, coating based on nanotechnology) and has

Druh

D - Stať ve sborníku

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

—

Návaznosti

N - Vyzkumna aktivita podporovana z neverejnych zdroju

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Sborník příspěvků

ISBN

978-80-7414-755-5

ISSN

—

e-ISSN

—

Počet stran výsledku

7

Strana od-do

226-233

Název nakladatele

Univerzita J.E.Purkyně v Ústí nad Labem

Místo vydání

Ústí nad Labem

Místo konání akce

Litoměřice

Datum konání akce

22. 10. 2014

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—