Temperatures in the core mold

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F44555601%3A13420%2F14%3A43886432" target="_blank" >RIV/44555601:13420/14:43886432 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Temperatures in the core mold

Popis výsledku v původním jazyce

The article deals with pistons casting made from aluminium alloy. Pistons are casting at steel mould with steel core. The casting is provided by gravity casting machine. The each machine is equipped by two metal moulds, which are preheated above temperature 160 °C before use. The steel core is also preheated by flame. The metal moulds and cores are heated up within the casting process. The temperature of the metal mould raise up to 200 °C and temperature of core is higher. The surface of the core is treated by nitration. The mould and core are cooled down by water during casting process. The core is overheated and its top part is finally cracked despite its intensive water cooling. The life time cycle of the core is decreased to approximately 5 to 15 thousands casting, which is only 15 % of life time cycle of core for production of other pistons. The temperature analysis of the core is presented by the article.

Název v anglickém jazyce

Temperatures in the core mold

Popis výsledku anglicky

The article deals with pistons casting made from aluminium alloy. Pistons are casting at steel mould with steel core. The casting is provided by gravity casting machine. The each machine is equipped by two metal moulds, which are preheated above temperature 160 °C before use. The steel core is also preheated by flame. The metal moulds and cores are heated up within the casting process. The temperature of the metal mould raise up to 200 °C and temperature of core is higher. The surface of the core is treated by nitration. The mould and core are cooled down by water during casting process. The core is overheated and its top part is finally cracked despite its intensive water cooling. The life time cycle of the core is decreased to approximately 5 to 15 thousands casting, which is only 15 % of life time cycle of core for production of other pistons. The temperature analysis of the core is presented by the article.

Druh

D - Stať ve sborníku

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2014

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

33. setkání kateder mechaniky tekutin a termomechaniky

ISBN

978-80-01-05538-0

ISSN

—

e-ISSN

—

Počet stran výsledku

4

Strana od-do

72-75

Název nakladatele

ČVUT v Praze

Místo vydání

Praha

Místo konání akce

Praha

Datum konání akce

9. 9. 2014

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—