Analyses of calcium influence on the AlSi9CuMnNi alloy

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F44555601%3A13420%2F18%3A43894103" target="_blank" >RIV/44555601:13420/18:43894103 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.12913/22998624/92101" target="_blank" >http://dx.doi.org/10.12913/22998624/92101</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.12913/22998624/92101" target="_blank" >10.12913/22998624/92101</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Analyses of calcium influence on the AlSi9CuMnNi alloy

Popis výsledku v původním jazyce

Treatment of metal alloys is one of the ways to affect the properties of the material. The article describes an experiment realized at FPTM UJEP when was experimentally studied the influence of alloys AlSi9CuMnNi calcium modification on some of its properties. The alloy was modified with various amounts of calcium and subsequently machining. Also hardness was measured in the resulting alloys. Machining was performed under certain cutting conditions. After machining the obtained chip was evaluated. Chip was evaluated for its shape, length and amount of chips per 100 g. Devices in FPTM laboratories were used to prepare experimental casts and to evaluate hardness and chips, like the melting furnace LAC K70/13, hardness tester Ernst AT 250X or microscope Olympus SZX 10. Experimental quantities of calcium was 0.05, 0.1 and 0.15 wt. %. Presented experiments are part of the extensive research undertaken at Faculty of Production Technologies and Management at Jan Evangelista Purkyne University in Usti nad Labem.

Název v anglickém jazyce

Analyses of calcium influence on the AlSi9CuMnNi alloy

Popis výsledku anglicky

Treatment of metal alloys is one of the ways to affect the properties of the material. The article describes an experiment realized at FPTM UJEP when was experimentally studied the influence of alloys AlSi9CuMnNi calcium modification on some of its properties. The alloy was modified with various amounts of calcium and subsequently machining. Also hardness was measured in the resulting alloys. Machining was performed under certain cutting conditions. After machining the obtained chip was evaluated. Chip was evaluated for its shape, length and amount of chips per 100 g. Devices in FPTM laboratories were used to prepare experimental casts and to evaluate hardness and chips, like the melting furnace LAC K70/13, hardness tester Ernst AT 250X or microscope Olympus SZX 10. Experimental quantities of calcium was 0.05, 0.1 and 0.15 wt. %. Presented experiments are part of the extensive research undertaken at Faculty of Production Technologies and Management at Jan Evangelista Purkyne University in Usti nad Labem.

Druh

J_ost - Ostatní články v recenzovaných periodicích

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/ED4.1.00%2F11.0260" target="_blank" >ED4.1.00/11.0260: Zkvalitnění vzdělávání a rozšíření výzkumu na FVTM</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Advances in Science and Technology Research Journal

ISSN

2299-8624

e-ISSN

—

Svazek periodika

12

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

PL - Polská republika

Počet stran výsledku

7

Strana od-do

32-38

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—