The formation and elimination of the negative influence of porosity on the properties of the alloy castings AlSi10Mg

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F44555601%3A13420%2F20%3A43895797" target="_blank" >RIV/44555601:13420/20:43895797 - isvavai.cz</a>

Výsledek na webu

<a href="https://journalmt.com/artkey/mft-202002-0013_the-formation-and-elimination-of-the-negative-influence-of-porosity-on-the-properties-of-the-alloy-castings-als.php" target="_blank" >https://journalmt.com/artkey/mft-202002-0013_the-formation-and-elimination-of-the-negative-influence-of-porosity-on-the-properties-of-the-alloy-castings-als.php</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/mft.2020.034" target="_blank" >10.21062/mft.2020.034</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The formation and elimination of the negative influence of porosity on the properties of the alloy castings AlSi10Mg

Popis výsledku v původním jazyce

Aluminum alloys are often contaminated with non-metallic inclusions. A large number of these phases accelerate the tendency of porosity in castings, significantly reduce corrosion resistance and above all affect mechanical prop-erties. Melting is one of the conventional methods for removing inclusions from melt. The efficiency of this process is influenced by several parameters such as the chemical composition of the melt, the amount of refining substances (wire, salts, tablets), the melting point and the casting method. Therefore, an experiment was performed to evalu-ate the effect of PROBAT FLUSS MIKRO 100 on the structural integrity in AlSi10Mg alloy. Porosity evaluation was performed by light microscopy. To confirm the results and their reflexes into the practical production of castings, a static tensile test was performed on the cast samples directly in the foundry operation.

Název v anglickém jazyce

The formation and elimination of the negative influence of porosity on the properties of the alloy castings AlSi10Mg

Popis výsledku anglicky

Aluminum alloys are often contaminated with non-metallic inclusions. A large number of these phases accelerate the tendency of porosity in castings, significantly reduce corrosion resistance and above all affect mechanical prop-erties. Melting is one of the conventional methods for removing inclusions from melt. The efficiency of this process is influenced by several parameters such as the chemical composition of the melt, the amount of refining substances (wire, salts, tablets), the melting point and the casting method. Therefore, an experiment was performed to evalu-ate the effect of PROBAT FLUSS MIKRO 100 on the structural integrity in AlSi10Mg alloy. Porosity evaluation was performed by light microscopy. To confirm the results and their reflexes into the practical production of castings, a static tensile test was performed on the cast samples directly in the foundry operation.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2020

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

20

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

170-176

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85090418669