New Method of Contactless Measurement and Analysis of CNC Machine Spindle Lopping

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46709002%3A_____%2F16%3AN0000028" target="_blank" >RIV/46709002:_____/16:N0000028 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

New Method of Contactless Measurement and Analysis of CNC Machine Spindle Lopping

Popis výsledku v původním jazyce

This article is focused and describes a system of a contactless measurement and analysis of a spindle lopping of CNC machines with horizontal axis orientation. The spindle lopping is caused by changes of spindle and headstock deformation during the spindle longitudinal travel and it has a considerable importance for precise CNC machine. The measurement system results from the research and development of a contactless measurement method using a laser source. The laser source is mounted in the CNC machine spindle and rotates together with the spindle. The laser beam goes to the sensor box placed at a specific distance from the spindle. Inside the sensor box, the beam is split into two paths and their traces are recorded by two cameras situated in a position that the beam path total length is different for each camera. The spindle lopping is calculated and analyzed from the camera records using appropriate software equipment. The form and application of the new measurement method is protected by patent CZ305542 (B6).

Název v anglickém jazyce

New Method of Contactless Measurement and Analysis of CNC Machine Spindle Lopping

Popis výsledku anglicky

This article is focused and describes a system of a contactless measurement and analysis of a spindle lopping of CNC machines with horizontal axis orientation. The spindle lopping is caused by changes of spindle and headstock deformation during the spindle longitudinal travel and it has a considerable importance for precise CNC machine. The measurement system results from the research and development of a contactless measurement method using a laser source. The laser source is mounted in the CNC machine spindle and rotates together with the spindle. The laser beam goes to the sensor box placed at a specific distance from the spindle. Inside the sensor box, the beam is split into two paths and their traces are recorded by two cameras situated in a position that the beam path total length is different for each camera. The spindle lopping is calculated and analyzed from the camera records using appropriate software equipment. The form and application of the new measurement method is protected by patent CZ305542 (B6).

Druh

D - Stať ve sborníku

CEP obor

JB - Senzory, čidla, měření a regulace

OECD FORD obor

—

Projekt

<a href="/cs/project/LO1213" target="_blank" >LO1213: Excelentní Strojírenský Výzkum</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Advances in Mechanism Design II - Proceedings of the XII International Conference on the Theory of Machines and Mechanism

ISBN

978-3-319-44086-6

ISSN

2211-0984

e-ISSN

—

Počet stran výsledku

6

Strana od-do

365-370

Název nakladatele

Springer

Místo vydání

Švýcarsko

Místo konání akce

Liberec

Datum konání akce

6. 9. 2016

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—