The effect of the laser spots overlap on the structure during square parts quenching of 1.7225 steel

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46709002%3A_____%2F18%3AN0000112" target="_blank" >RIV/46709002:_____/18:N0000112 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

The effect of the laser spots overlap on the structure during square parts quenching of 1.7225 steel

Popis výsledku v původním jazyce

The article deals with the problematics of laser spots overlap during square parts quenching. It is necessary to set optimal distance between two neighboring tracks. If this distance is too low, the second pass of the laser can temper the previously hardened track. On the other hand, the stripe completely without heat treatment remains in the surface if a too long distance between the quenching tracks is used. The optimal distance of laser spots at quenching of 1.7225 steel was found under present research. It was verified that at least 4 mm overlap is needed.

Název v anglickém jazyce

The effect of the laser spots overlap on the structure during square parts quenching of 1.7225 steel

Popis výsledku anglicky

The article deals with the problematics of laser spots overlap during square parts quenching. It is necessary to set optimal distance between two neighboring tracks. If this distance is too low, the second pass of the laser can temper the previously hardened track. On the other hand, the stripe completely without heat treatment remains in the surface if a too long distance between the quenching tracks is used. The optimal distance of laser spots at quenching of 1.7225 steel was found under present research. It was verified that at least 4 mm overlap is needed.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

<a href="/cs/project/LO1213" target="_blank" >LO1213: Excelentní Strojírenský Výzkum</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

IOP Conference Series: Materials Science and Engineering

ISBN

978-80-87294-86-4

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

P8 1-6

Název nakladatele

IOP Publishing

Místo vydání

—

Místo konání akce

Plzeň

Datum konání akce

14. 11. 2018

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—