Comparison of coated carbide cutting tool inserts used in machining of cylinder liners made of grey cast iron
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F09%3A%230001129" target="_blank" >RIV/46747885:24210/09:#0001129 - isvavai.cz</a>
Výsledek na webu
—
DOI - Digital Object Identifier
—
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Comparison of coated carbide cutting tool inserts used in machining of cylinder liners made of grey cast iron
Popis výsledku v původním jazyce
This article is aimed at the comparison of coated carbide cutting tool inserts used in machining of cylinder liners made of grey cast iron. The comparison has been realized through the tool life tests. The measurement has been carried out at three cutting speeds at constant cutting conditions. From the obtained values, the regression coefficients have been evaluated. Subsequently, extrapolation has been carried out by means of the regression line for the cutting speed in the range of 250 ? 500 m/min, and for this the extended cutting speed range the interval reliability has been evaluated. In the experiments, it has been found, at the given conditions, it is not possible to recommend these cutting tool inserts for high speed machining.
Název v anglickém jazyce
Comparison of coated carbide cutting tool inserts used in machining of cylinder liners made of grey cast iron
Popis výsledku anglicky
This article is aimed at the comparison of coated carbide cutting tool inserts used in machining of cylinder liners made of grey cast iron. The comparison has been realized through the tool life tests. The measurement has been carried out at three cutting speeds at constant cutting conditions. From the obtained values, the regression coefficients have been evaluated. Subsequently, extrapolation has been carried out by means of the regression line for the cutting speed in the range of 250 ? 500 m/min, and for this the extended cutting speed range the interval reliability has been evaluated. In the experiments, it has been found, at the given conditions, it is not possible to recommend these cutting tool inserts for high speed machining.
Klasifikace
Druh
J<sub>x</sub> - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)
CEP obor
JR - Ostatní strojírenství
OECD FORD obor
—
Návaznosti výsledku
Projekt
—
Návaznosti
Z - Vyzkumny zamer (s odkazem do CEZ)
Ostatní
Rok uplatnění
2009
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Manufacturing Technology
ISSN
1213-2489
e-ISSN
—
Svazek periodika
9
Číslo periodika v rámci svazku
december
Stát vydavatele periodika
CZ - Česká republika
Počet stran výsledku
8
Strana od-do
—
Kód UT WoS článku
—
EID výsledku v databázi Scopus
—