Reducing labor intensity in the development of new universal cutting fluids for machining

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F18%3A00006105" target="_blank" >RIV/46747885:24210/18:00006105 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.21062/ujep/60.2018/a/1213-2489/MT/18/1/99" target="_blank" >http://dx.doi.org/10.21062/ujep/60.2018/a/1213-2489/MT/18/1/99</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/60.2018/a/1213-2489/MT/18/1/99" target="_blank" >10.21062/ujep/60.2018/a/1213-2489/MT/18/1/99</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Reducing labor intensity in the development of new universal cutting fluids for machining

Popis výsledku v původním jazyce

© 2018. Published by Manufacturing Technology. The process of developing new universal cutting fluids is labor-intensive due to the requirement of conducting experiments to determine the impact of numerous additives on tool life during different technological operations. Therefore, finding the best cutting fluid, the use of which will result in the longest tool life, is a long and laborious process. To reduce labor intensity while creating new cutting fluids accelerated methods are applied first, such as the method of determining the tribometric properties of a new fluid. Subsequently wear tests are carried out, using only those cutting fluids which show the best tribological behavior. The aim of this study is to reduce labor intensity in developing new universal cutting fluids. For this purpose, a new accelerated method has been developed, which helps to determine the capability of the fluid to counteract the adhesion between the chips and the cutting tool. Furthermore, a new sequence of cutting fluid tests has been proposed which significantly reduces the amount of wear tests, resulting inconsiderable reduction of the overall labor intensity in the development of new cutting fluids.

Název v anglickém jazyce

Reducing labor intensity in the development of new universal cutting fluids for machining

Popis výsledku anglicky

© 2018. Published by Manufacturing Technology. The process of developing new universal cutting fluids is labor-intensive due to the requirement of conducting experiments to determine the impact of numerous additives on tool life during different technological operations. Therefore, finding the best cutting fluid, the use of which will result in the longest tool life, is a long and laborious process. To reduce labor intensity while creating new cutting fluids accelerated methods are applied first, such as the method of determining the tribometric properties of a new fluid. Subsequently wear tests are carried out, using only those cutting fluids which show the best tribological behavior. The aim of this study is to reduce labor intensity in developing new universal cutting fluids. For this purpose, a new accelerated method has been developed, which helps to determine the capability of the fluid to counteract the adhesion between the chips and the cutting tool. Furthermore, a new sequence of cutting fluid tests has been proposed which significantly reduces the amount of wear tests, resulting inconsiderable reduction of the overall labor intensity in the development of new cutting fluids.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

18

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

99-105

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85049597907