Effect of hydraulic oil entering the cutting fluid on the tool life and roughness in milling of structural steel

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24210%2F19%3A00007172" target="_blank" >RIV/46747885:24210/19:00007172 - isvavai.cz</a>

Výsledek na webu

<a href="https://arl.ujep.cz/arl-ujep/cs/csg/?repo=ujeprepo&key=31388238677" target="_blank" >https://arl.ujep.cz/arl-ujep/cs/csg/?repo=ujeprepo&key=31388238677</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/316.2019/a/1213-2489/MT/19/3/482" target="_blank" >10.21062/ujep/316.2019/a/1213-2489/MT/19/3/482</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of hydraulic oil entering the cutting fluid on the tool life and roughness in milling of structural steel

Popis výsledku v původním jazyce

Thanks to their chemical and physical properties, the cutting fluids can significantly affect the process of machining - the use of cutting fluid reduces the roughness of the machined surface and increases the tool life. However, during the machining the oil from the hydraulic system of the machine often gets into the cutting fluid, which can alter the properties of the cutting fluid. In scientific literature there is no information on the effect of the hydraulic oil entering the cutting fluid on the tool life and roughness in machining of the structural steel. In this regard, at the laboratory of the Department of Machining and Assembly of the Technical University of Liberec, there has been conducted a study to ascertain the effects of hydraulic oil getting into different types of cutting fluids during the milling of structural steel. © 2019. Published by Manufacturing Technology.

Název v anglickém jazyce

Effect of hydraulic oil entering the cutting fluid on the tool life and roughness in milling of structural steel

Popis výsledku anglicky

Thanks to their chemical and physical properties, the cutting fluids can significantly affect the process of machining - the use of cutting fluid reduces the roughness of the machined surface and increases the tool life. However, during the machining the oil from the hydraulic system of the machine often gets into the cutting fluid, which can alter the properties of the cutting fluid. In scientific literature there is no information on the effect of the hydraulic oil entering the cutting fluid on the tool life and roughness in machining of the structural steel. In this regard, at the laboratory of the Department of Machining and Assembly of the Technical University of Liberec, there has been conducted a study to ascertain the effects of hydraulic oil getting into different types of cutting fluids during the milling of structural steel. © 2019. Published by Manufacturing Technology.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

19

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

482-486

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85069876602