Barrier properties of poly lactic acid packaging films reinforced with jute micro/nano particles

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24410%2F12%3A%230001289" target="_blank" >RIV/46747885:24410/12:#0001289 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.scopus.com/inward/record.url?eid=2-s2.0-84870543042&partnerID=40&md5=f4d43e9550764f547d18a5470cd90002" target="_blank" >http://www.scopus.com/inward/record.url?eid=2-s2.0-84870543042&partnerID=40&md5=f4d43e9550764f547d18a5470cd90002</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Barrier properties of poly lactic acid packaging films reinforced with jute micro/nano particles

Popis výsledku v původním jazyce

Textile industry generate significant amount of waste fibres in form of short lengths during mechanical processing. However these short fibres possess excellent properties suitable for many other applications. The objective of this work was to use the short fibres for the preparation of nanoparticles as fillers in nanocomposite applications. In the given research paper, jute fibres were at first refined to micro/nanoscale particles by high energy planetary ball milling in dry condition and wet condition. Wet milling was observed more efficient than dry milling in terms of unimodality of size distribution but no significant reduction in size below 500 nm was obtained even after milling for 3 hours. These particles were then added into the matrix PLA andcomposite films were produced by hand casting method to evaluate the reinforcement performance of jute micro/nano particle for thermal and barrier properties in food packaging applications.

Název v anglickém jazyce

Barrier properties of poly lactic acid packaging films reinforced with jute micro/nano particles

Popis výsledku anglicky

Textile industry generate significant amount of waste fibres in form of short lengths during mechanical processing. However these short fibres possess excellent properties suitable for many other applications. The objective of this work was to use the short fibres for the preparation of nanoparticles as fillers in nanocomposite applications. In the given research paper, jute fibres were at first refined to micro/nanoscale particles by high energy planetary ball milling in dry condition and wet condition. Wet milling was observed more efficient than dry milling in terms of unimodality of size distribution but no significant reduction in size below 500 nm was obtained even after milling for 3 hours. These particles were then added into the matrix PLA andcomposite films were produced by hand casting method to evaluate the reinforcement performance of jute micro/nano particle for thermal and barrier properties in food packaging applications.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Vlákna a Textil

ISSN

1335-0617

e-ISSN

—

Svazek periodika

14

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

SK - Slovenská republika

Počet stran výsledku

7

Strana od-do

10-16

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—