Multilayer assembly for protection against laser light
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24410%2F20%3A00008661" target="_blank" >RIV/46747885:24410/20:00008661 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.tandfonline.com/doi/pdf/10.1080/00405000.2019.1631094" target="_blank" >https://www.tandfonline.com/doi/pdf/10.1080/00405000.2019.1631094</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.1080/00405000.2019.1631094" target="_blank" >10.1080/00405000.2019.1631094</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Multilayer assembly for protection against laser light
Popis výsledku v původním jazyce
The influence of multilayer assembly on protection against infrared laser light was investigated. Multilayer assembly was exposed to a pulsed laser device, Marcatex 150 Flexi, with wavelength of 10.6 μm. Marking Speed [bits.ms ] is the influenced parameter of laser irradiation. It presents the speed of burning. Multilayer assembly was consisted of three layers of textile materials. The first layer was top layer made of aramid, glass or Basalt fabric. The second layer is middle layer made of wool fabric. The third layer is bottom layer made of cotton fabric. Temperature of multilayer assembly was measured on the top and bottom layer of sample by contactless thermometer. Multilayer assembly was analysed by scanning electron microscopy before and after laser irradiation. The temperature of the bottom layer of multilayer assembly consist of aramid-wool-cotton was 74 °C at marking speed of 40 bits.ms . It is the lowest temperature. It can be concluded that the multilayer assembly containing aramid-wool-cotton provided the best protection against laser irradiation.
Název v anglickém jazyce
Multilayer assembly for protection against laser light
Popis výsledku anglicky
The influence of multilayer assembly on protection against infrared laser light was investigated. Multilayer assembly was exposed to a pulsed laser device, Marcatex 150 Flexi, with wavelength of 10.6 μm. Marking Speed [bits.ms ] is the influenced parameter of laser irradiation. It presents the speed of burning. Multilayer assembly was consisted of three layers of textile materials. The first layer was top layer made of aramid, glass or Basalt fabric. The second layer is middle layer made of wool fabric. The third layer is bottom layer made of cotton fabric. Temperature of multilayer assembly was measured on the top and bottom layer of sample by contactless thermometer. Multilayer assembly was analysed by scanning electron microscopy before and after laser irradiation. The temperature of the bottom layer of multilayer assembly consist of aramid-wool-cotton was 74 °C at marking speed of 40 bits.ms . It is the lowest temperature. It can be concluded that the multilayer assembly containing aramid-wool-cotton provided the best protection against laser irradiation.
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20503 - Textiles; including synthetic dyes, colours, fibres (nanoscale materials to be 2.10; biomaterials to be 2.9)
Návaznosti výsledku
Projekt
<a href="/cs/project/EF16_019%2F0000843" target="_blank" >EF16_019/0000843: Hybridní materiály pro hierarchické struktury</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2020
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
Journal of the Textile Institute
ISSN
0040-5000
e-ISSN
—
Svazek periodika
111
Číslo periodika v rámci svazku
2
Stát vydavatele periodika
GB - Spojené království Velké Británie a Severního Irska
Počet stran výsledku
9
Strana od-do
226-234
Kód UT WoS článku
000507772500009
EID výsledku v databázi Scopus
2-s2.0-85068088612