Preparation and Comparison of Polymeric Membranes with the Addition of Metal Micro- and Nanopartilces

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F46747885%3A24620%2F16%3A00000837" target="_blank" >RIV/46747885:24620/16:00000837 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.czemp.cz/cs/aktuality/ohlednuti-za-4rocnikem-workshopu-studentskych-praci" target="_blank" >http://www.czemp.cz/cs/aktuality/ohlednuti-za-4rocnikem-workshopu-studentskych-praci</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Preparation and Comparison of Polymeric Membranes with the Addition of Metal Micro- and Nanopartilces

Popis výsledku v původním jazyce

A carried out bachelor thesis was focused on preparation and characterization of polyethersulfon membranes doped by micro- and nanoparticles of zinc oxide. Particles sizes of 13, 50, 100 and 1000 nm in the diameter were used and compared. Main goal was to prepare membrane with antimicrobial properties that can prolong the filtration cycle.The antimicrobial properties of the prepared membranes, their filtration characteristics with the demineralized water and with the diluted activated sludge were evaluated. Moreover, the stability of ZnO in the membrane, ZnO leaching respectively, cross-section and surface morphology, and contact angle was evaluated as well.

Název v anglickém jazyce

Preparation and Comparison of Polymeric Membranes with the Addition of Metal Micro- and Nanopartilces

Popis výsledku anglicky

A carried out bachelor thesis was focused on preparation and characterization of polyethersulfon membranes doped by micro- and nanoparticles of zinc oxide. Particles sizes of 13, 50, 100 and 1000 nm in the diameter were used and compared. Main goal was to prepare membrane with antimicrobial properties that can prolong the filtration cycle.The antimicrobial properties of the prepared membranes, their filtration characteristics with the demineralized water and with the diluted activated sludge were evaluated. Moreover, the stability of ZnO in the membrane, ZnO leaching respectively, cross-section and surface morphology, and contact angle was evaluated as well.

Druh

O - Ostatní výsledky

CEP obor

JI - Kompositní materiály

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů