Hard to machine materials machining with cutting ceramic

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F05%3A00503200" target="_blank" >RIV/49777513:23210/05:00503200 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Hard to machine materials machining with cutting ceramic

Popis výsledku v původním jazyce

This article is dedicated to machining of hard materials such as hardened steel 58 HRC and Ni alloys type INCONEL with the aid of cutting ceramics. The first part of the article contains analysis and summary of current ceramics production including problems of thin layers deposition and also contains development in this specific area. The following part of this article describes cutting tests which were applied to each type of the ceramics. For these tests different types of ceramics were chosen eitherwith or without thin wear protective layers. Also different producers of the cutting inserts were chosen to compare quality of their products. The results of these cutting tests show a quality benefit of the thin layers for the ceramics that is used formachining of hard to machine materials with regard to tool life, quality of the surface finish and accuracy of machining.

Název v anglickém jazyce

Hard to machine materials machining with cutting ceramic

Popis výsledku anglicky

This article is dedicated to machining of hard materials such as hardened steel 58 HRC and Ni alloys type INCONEL with the aid of cutting ceramics. The first part of the article contains analysis and summary of current ceramics production including problems of thin layers deposition and also contains development in this specific area. The following part of this article describes cutting tests which were applied to each type of the ceramics. For these tests different types of ceramics were chosen eitherwith or without thin wear protective layers. Also different producers of the cutting inserts were chosen to compare quality of their products. The results of these cutting tests show a quality benefit of the thin layers for the ceramics that is used formachining of hard to machine materials with regard to tool life, quality of the surface finish and accuracy of machining.

Druh

D - Stať ve sborníku

CEP obor

JQ - Strojní zařízení a nástroje

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2005

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

ICPM 2005

ISBN

3-901888-31-4

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

—

Název nakladatele

Abteilung Austauschbau und Messtechnik

Místo vydání

Wien

Místo konání akce

Wien

Datum konání akce

1. 1. 2005

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—