Increasing of the Cutting Tool Efficiency from Tool Steel by Using Fluidization Method

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F15%3A43923816" target="_blank" >RIV/49777513:23210/15:43923816 - isvavai.cz</a>

Výsledek na webu

<a href="http://ac.els-cdn.com/S1877705815004762/1-s2.0-S1877705815004762-main.pdf?_tid=96ae6072-bdad-11e4-841a-00000aacb35d&acdnat=1424951578_dbb3d5654e61cf7b16977bf2968f8acc" target="_blank" >http://ac.els-cdn.com/S1877705815004762/1-s2.0-S1877705815004762-main.pdf?_tid=96ae6072-bdad-11e4-841a-00000aacb35d&acdnat=1424951578_dbb3d5654e61cf7b16977bf2968f8acc</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.proeng.2015.01.449" target="_blank" >10.1016/j.proeng.2015.01.449</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Increasing of the Cutting Tool Efficiency from Tool Steel by Using Fluidization Method

Popis výsledku v původním jazyce

For the increasing of the cutting tool efficiency is possible to use two main methods. One of them build the thin coating on the surface and the surface volume increase. They are standard methods like as PVD or CVD deposition and their modifications. Thesecond one principles are based on the influence of the cutting tool surface by chemical elements which create a special surface properties into the material depth. The influences depth is depend on the methods and could be made from microns to millimetres. In our case the fluidization methods were used specifically carbonitriding and carburizing. These methods causes the increasing of the surface hardness. So this article is focused on possibilities of using this methods for the surface modification of cutting tools made from tool steel. For the tests the straight turning tools with the different surface modification were used. During the test the cutting tool wear, surface quality and surface tool properties were monitored.

Název v anglickém jazyce

Increasing of the Cutting Tool Efficiency from Tool Steel by Using Fluidization Method

Popis výsledku anglicky

For the increasing of the cutting tool efficiency is possible to use two main methods. One of them build the thin coating on the surface and the surface volume increase. They are standard methods like as PVD or CVD deposition and their modifications. Thesecond one principles are based on the influence of the cutting tool surface by chemical elements which create a special surface properties into the material depth. The influences depth is depend on the methods and could be made from microns to millimetres. In our case the fluidization methods were used specifically carbonitriding and carburizing. These methods causes the increasing of the surface hardness. So this article is focused on possibilities of using this methods for the surface modification of cutting tools made from tool steel. For the tests the straight turning tools with the different surface modification were used. During the test the cutting tool wear, surface quality and surface tool properties were monitored.

Druh

D - Stať ve sborníku

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

<a href="/cs/project/ED2.1.00%2F03.0093" target="_blank" >ED2.1.00/03.0093: Regionální technologický institut - RTI</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Procedia Engineering

ISBN

978-3-901509-99-5

ISSN

1877-7058

e-ISSN

—

Počet stran výsledku

6

Strana od-do

912-917

Název nakladatele

DAAAM International Vienna

Místo vydání

Vídeň

Místo konání akce

Vídeň

Datum konání akce

26. 11. 2014

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—