An Approach to the Machining of Hard Coating Prepared by Laser Cladding and Thermal Spraying

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F15%3A43926298" target="_blank" >RIV/49777513:23210/15:43926298 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/49777513:23640/15:43926298

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

An Approach to the Machining of Hard Coating Prepared by Laser Cladding and Thermal Spraying

Popis výsledku v původním jazyce

Thermal spraying and laser cladding are widely used in industry for different coating applications. The use of these techniques usually requires a finishing post-process. However, the characteristics of these coatings, such as their high hardness, make difficult to achieve satisfactory results with conventional machining processes. The present study provides a description of the main characteristics of the laser cladding and thermal spraying processes. For machining of these coatings, conventionally, grinding is the first option selected. However, modern industries require gaining flexibility and improving their productivity. Thus, other alternatives such as milling or turning need to be assessed. In this sense, in the last section, several experimental investigations on the machining of WC-Co and Stellite coatings are presented. These studies can bring some insights to face the machining of hard coatings prepared by the laser cladding and thermal spraying techniques. For instance, the

Název v anglickém jazyce

An Approach to the Machining of Hard Coating Prepared by Laser Cladding and Thermal Spraying

Popis výsledku anglicky

Thermal spraying and laser cladding are widely used in industry for different coating applications. The use of these techniques usually requires a finishing post-process. However, the characteristics of these coatings, such as their high hardness, make difficult to achieve satisfactory results with conventional machining processes. The present study provides a description of the main characteristics of the laser cladding and thermal spraying processes. For machining of these coatings, conventionally, grinding is the first option selected. However, modern industries require gaining flexibility and improving their productivity. Thus, other alternatives such as milling or turning need to be assessed. In this sense, in the last section, several experimental investigations on the machining of WC-Co and Stellite coatings are presented. These studies can bring some insights to face the machining of hard coatings prepared by the laser cladding and thermal spraying techniques. For instance, the

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

<a href="/cs/project/ED2.1.00%2F03.0093" target="_blank" >ED2.1.00/03.0093: Regionální technologický institut - RTI</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Strojírenská technologie

ISSN

1211-4162

e-ISSN

—

Svazek periodika

XX

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

7

Strana od-do

11-17

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—