Modern trends in design and testing of milling cutters

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F16%3A43930166" target="_blank" >RIV/49777513:23210/16:43930166 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2015/093.pdf" target="_blank" >http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2015/093.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.2507/26th.daaam.proceedings.093" target="_blank" >10.2507/26th.daaam.proceedings.093</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Modern trends in design and testing of milling cutters

Popis výsledku v původním jazyce

Design of modern cutting tools should comply with demands on their dynamic behavior and with the possibility of balancing them. Without sufficient balancing, there is risk of a failure of the cutting tool during cut. The right shape and position between the seat and the tool axis are crucial for a productive cutting tool. This is why it is necessary to control these factors. Because of the complexity of insert seat shape, it is appropriate to use modern technologies. This article is focused on designing a cutting tool with inserts which will have high durability. The cutting tool is designed for machining heat resistant alloys. The cutting tool geometry and direction of coolant holes are controlled by the variation focus method. After designing the cutting tool, the article is focused on manufacturing the tool. The last part focuses on controlling the desired parameters and on practical tests of the designed cutting tool.

Název v anglickém jazyce

Modern trends in design and testing of milling cutters

Popis výsledku anglicky

Design of modern cutting tools should comply with demands on their dynamic behavior and with the possibility of balancing them. Without sufficient balancing, there is risk of a failure of the cutting tool during cut. The right shape and position between the seat and the tool axis are crucial for a productive cutting tool. This is why it is necessary to control these factors. Because of the complexity of insert seat shape, it is appropriate to use modern technologies. This article is focused on designing a cutting tool with inserts which will have high durability. The cutting tool is designed for machining heat resistant alloys. The cutting tool geometry and direction of coolant holes are controlled by the variation focus method. After designing the cutting tool, the article is focused on manufacturing the tool. The last part focuses on controlling the desired parameters and on practical tests of the designed cutting tool.

Druh

D - Stať ve sborníku

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

<a href="/cs/project/LO1502" target="_blank" >LO1502: Rozvoj Regionálního technologického institutu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Annals of DAAAM and Proceedings of the International DAAAM Symposium

ISBN

978-3-902734-07-5

ISSN

1726-9679

e-ISSN

—

Počet stran výsledku

5

Strana od-do

683-687

Název nakladatele

DAAAM International

Místo vydání

Vienna

Místo konání akce

Zadar

Datum konání akce

21. 10. 2015

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—