DETERMINING THE STRENGTH OF COMPOSITE CYLINDRICAL BONDED JOINTS USING NUMERICAL SIMULATION WITH COHESIVE ELEMENTS

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F18%3A43953168" target="_blank" >RIV/49777513:23210/18:43953168 - isvavai.cz</a>

Výsledek na webu

<a href="http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2018/090.pdf" target="_blank" >http://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2018/090.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.2507/29th.daaam.proceedings.090" target="_blank" >10.2507/29th.daaam.proceedings.090</a>

Jazyk výsledku

angličtina

Název v původním jazyce

DETERMINING THE STRENGTH OF COMPOSITE CYLINDRICAL BONDED JOINTS USING NUMERICAL SIMULATION WITH COHESIVE ELEMENTS

Popis výsledku v původním jazyce

The adhesive joints belongs into most used connection in area of the composite components. The prediction of the strength of the bonded joints is still very problematic and many approaches can be used to dimension them. The paper deals with determining the strength of cylindrical composite adhesive joint using numerical simulation. In this case is used numerical simulation based on the finite element approach and cohesive elements were used as substitution of the adhesive. The experimental measurements were done for determination of necessary parameters of behaviour of gluing for cohesive zone model according ASTM standards. The parameters for mode I was determined by double cantilever beam test and the end notched three point bending test was carried out fo r finding parameters of mode II. Based on the obtained parameters, verification was performed on cylindrical s amples with the accuracy up to 6%.

Název v anglickém jazyce

DETERMINING THE STRENGTH OF COMPOSITE CYLINDRICAL BONDED JOINTS USING NUMERICAL SIMULATION WITH COHESIVE ELEMENTS

Popis výsledku anglicky

The adhesive joints belongs into most used connection in area of the composite components. The prediction of the strength of the bonded joints is still very problematic and many approaches can be used to dimension them. The paper deals with determining the strength of cylindrical composite adhesive joint using numerical simulation. In this case is used numerical simulation based on the finite element approach and cohesive elements were used as substitution of the adhesive. The experimental measurements were done for determination of necessary parameters of behaviour of gluing for cohesive zone model according ASTM standards. The parameters for mode I was determined by double cantilever beam test and the end notched three point bending test was carried out fo r finding parameters of mode II. Based on the obtained parameters, verification was performed on cylindrical s amples with the accuracy up to 6%.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

<a href="/cs/project/LO1502" target="_blank" >LO1502: Rozvoj Regionálního technologického institutu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2018

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Annals of DAAAM and Proceedings of the International DAAAM Symposium

ISBN

978-3-902734-20-4

ISSN

1726-9679

e-ISSN

neuvedeno

Počet stran výsledku

7

Strana od-do

624-630

Název nakladatele

DAAAM International Vienna

Místo vydání

Vídeň, Rakousko

Místo konání akce

Zadar, Croatia EU

Datum konání akce

24. 10. 2018

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—