Effect of the Cascade Injection Molding on the Filling Behaviour

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F19%3A43957367" target="_blank" >RIV/49777513:23210/19:43957367 - isvavai.cz</a>

Výsledek na webu

<a href="http://hdl.handle.net/11025/36424" target="_blank" >http://hdl.handle.net/11025/36424</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/399.2019/a/1213-2489/MT/19/6/936" target="_blank" >10.21062/ujep/399.2019/a/1213-2489/MT/19/6/936</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Effect of the Cascade Injection Molding on the Filling Behaviour

Popis výsledku v původním jazyce

This paper deals with different ways of injection molding. A plastic part can be generally filled many ways. Use of more than one gate is common in a plastic industry. Cascade molding can affect the final properties of the product, especially by the number of gates, timing of closing – opening and by the order of individual gates. A simple plastic box is used as a reference part in this paper. It is a longitudinal part with one side longer than the others. There are ribs on the bottom side of the box. The injection system is located on the bottom side of the box. The filling process is considering five individual gates. All possible filling variants are compared with respect to temperature, pressure and number of weld lines. Sequential filling from the central point of the box is the most suitable option.

Název v anglickém jazyce

Effect of the Cascade Injection Molding on the Filling Behaviour

Popis výsledku anglicky

This paper deals with different ways of injection molding. A plastic part can be generally filled many ways. Use of more than one gate is common in a plastic industry. Cascade molding can affect the final properties of the product, especially by the number of gates, timing of closing – opening and by the order of individual gates. A simple plastic box is used as a reference part in this paper. It is a longitudinal part with one side longer than the others. There are ribs on the bottom side of the box. The injection system is located on the bottom side of the box. The filling process is considering five individual gates. All possible filling variants are compared with respect to temperature, pressure and number of weld lines. Sequential filling from the central point of the box is the most suitable option.

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

<a href="/cs/project/EF18_069%2F0010040" target="_blank" >EF18_069/0010040: Výzkum aditivních technologií pro budoucí uplatnění ve strojírenské praxi - RTI plus</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

19

Číslo periodika v rámci svazku

6

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

936-940

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85077808543