Influence of boridation on microstructure and properties of aluminium alloy EN AW-2024
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F20%3A43960889" target="_blank" >RIV/49777513:23210/20:43960889 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2020/067.pdf" target="_blank" >https://www.daaam.info/Downloads/Pdfs/proceedings/proceedings_2020/067.pdf</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.2507/31st.daaam.proceedings.067" target="_blank" >10.2507/31st.daaam.proceedings.067</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Influence of boridation on microstructure and properties of aluminium alloy EN AW-2024
Popis výsledku v původním jazyce
The aim of this case study was to analyse the influence of the boriding process on the structure and mechanical properties of the aluminium alloy EN AW 2024. The prepared samples were processed under various process parameters in Durferrit powder. After chemical-thermal treatment, changes in the microstructure of the samples were evaluated using light and scanning electron microscopy methods. Changes in mechanical properties were assessed on the basis of the analysis of the hardness of the sample substrate using the Vickers hardness test. The samples were further measured for corrosion resistance to the selected corrosion environment of 5% NaCl solution using a potentiostat and resistance to tribological abrasion by the Ball on-disk method. Based on the obtained data, it can be stated, for example, that during the boriding process of this alloy it is important to prevent the formation of a passivation layer of Al2O3 before and during the process of chemical-thermal treatment. This can be achieved, for example, by immediate application of a boriding agent or other agent which prevents the interaction of oxygen with the surface of the sample to be treated. The samples after the boriding process also showed an increase in the resistance to the used corrosive environment of 5% NaCl solution and a lower value of the wear coefficient compared to the samples without chemical-thermal treatment.
Název v anglickém jazyce
Influence of boridation on microstructure and properties of aluminium alloy EN AW-2024
Popis výsledku anglicky
The aim of this case study was to analyse the influence of the boriding process on the structure and mechanical properties of the aluminium alloy EN AW 2024. The prepared samples were processed under various process parameters in Durferrit powder. After chemical-thermal treatment, changes in the microstructure of the samples were evaluated using light and scanning electron microscopy methods. Changes in mechanical properties were assessed on the basis of the analysis of the hardness of the sample substrate using the Vickers hardness test. The samples were further measured for corrosion resistance to the selected corrosion environment of 5% NaCl solution using a potentiostat and resistance to tribological abrasion by the Ball on-disk method. Based on the obtained data, it can be stated, for example, that during the boriding process of this alloy it is important to prevent the formation of a passivation layer of Al2O3 before and during the process of chemical-thermal treatment. This can be achieved, for example, by immediate application of a boriding agent or other agent which prevents the interaction of oxygen with the surface of the sample to be treated. The samples after the boriding process also showed an increase in the resistance to the used corrosive environment of 5% NaCl solution and a lower value of the wear coefficient compared to the samples without chemical-thermal treatment.
Klasifikace
Druh
D - Stať ve sborníku
CEP obor
—
OECD FORD obor
20501 - Materials engineering
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2020
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název statě ve sborníku
31th DAAAM International Symposium on Intelligent Manufacturing and Automation
ISBN
978-3-902734-29-7
ISSN
1726-9679
e-ISSN
—
Počet stran výsledku
8
Strana od-do
0477-0484
Název nakladatele
DAAAM International
Místo vydání
Viena
Místo konání akce
Mostar
Datum konání akce
21. 10. 2020
Typ akce podle státní příslušnosti
WRD - Celosvětová akce
Kód UT WoS článku
—