Hot Rolling vs. Forging: Newly Developed Fe-Al-O Based OPH Alloy

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23210%2F21%3A43960997" target="_blank" >RIV/49777513:23210/21:43960997 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/68081723:_____/21:00560553

Výsledek na webu

<a href="https://www.mdpi.com/2075-4701/11/2/228" target="_blank" >https://www.mdpi.com/2075-4701/11/2/228</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/met11020228" target="_blank" >10.3390/met11020228</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Hot Rolling vs. Forging: Newly Developed Fe-Al-O Based OPH Alloy

Popis výsledku v původním jazyce

Two oxide precipitation hardened (OPH) Fe-Al-O-based steels were prepared by mechanical al-loying. In addition to the variant using yttria nano-precipitates to improve the mechanical properties, a variant using only alumina precipitates for strengthening was also prepared. Therefore, a more economically acceptable variant of these steels was developed. Hot consolida-tion is a significant production step for achieving the required mechanical properties. Hot con-solidation was performed by either hot rolling or forging. The heat treatment was subsequently performed on both variants (0.85Fe–0.11Al–0.03Y2O3–0.01Y and 0.87Fe–0.11Al–0.02O2) of the alloys to support secondary recrystallization. The paper describes the influence of the consolidation method on grain size, material recrystallization, and mechanical properties. The difference in the consolidation method was reflected in the grain size after the heat treatment, where the material consolidated by hot rolling reached a grain size of almost 200 μm, while after forging the max-imum grain size was around 30 μm. A higher ultimate tensile strength was achieved with forged states, both with and without the heat treatment.

Název v anglickém jazyce

Hot Rolling vs. Forging: Newly Developed Fe-Al-O Based OPH Alloy

Popis výsledku anglicky

Two oxide precipitation hardened (OPH) Fe-Al-O-based steels were prepared by mechanical al-loying. In addition to the variant using yttria nano-precipitates to improve the mechanical properties, a variant using only alumina precipitates for strengthening was also prepared. Therefore, a more economically acceptable variant of these steels was developed. Hot consolida-tion is a significant production step for achieving the required mechanical properties. Hot con-solidation was performed by either hot rolling or forging. The heat treatment was subsequently performed on both variants (0.85Fe–0.11Al–0.03Y2O3–0.01Y and 0.87Fe–0.11Al–0.02O2) of the alloys to support secondary recrystallization. The paper describes the influence of the consolidation method on grain size, material recrystallization, and mechanical properties. The difference in the consolidation method was reflected in the grain size after the heat treatment, where the material consolidated by hot rolling reached a grain size of almost 200 μm, while after forging the max-imum grain size was around 30 μm. A higher ultimate tensile strength was achieved with forged states, both with and without the heat treatment.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/GA17-01641S" target="_blank" >GA17-01641S: Zlepšení vlastností a komplexní charakterizace nové generace oxidy precipitačně vytvrzených ocelí na bázi Fe-Al-O</a><br>

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Metals

ISSN

2075-4701

e-ISSN

—

Svazek periodika

11

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

10

Strana od-do

—

Kód UT WoS článku

000622768900001

EID výsledku v databázi Scopus

2-s2.0-85099829803