Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates with different thicknesses

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23520%2F17%3A43931160" target="_blank" >RIV/49777513:23520/17:43931160 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/49777513:23640/17:43931160

Výsledek na webu

<a href="http://mit.imt.si/Revija/izvodi/mit171/zemcik.pdf" target="_blank" >http://mit.imt.si/Revija/izvodi/mit171/zemcik.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.17222/mit.2015.195" target="_blank" >10.17222/mit.2015.195</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates with different thicknesses

Popis výsledku v původním jazyce

This work focuses on the assessment of real fiber and matrix volume ratios of unidirectional fiber composites which can be used for the design of corresponding numerical models on micro-scale. Samples with polished cross-sections were prepared from three composite plates and they were analyzed using Scanning electron microscopy (SEM) previously. All plates were manufactured from the same prepreg material using autoclave technology. Each plate consisted of different number of plies. Images of various parts of the composite cross-sections obtained with SEM are analyzed using several image processing techniques programmed in Matlab, its Image Processing Toolbox, and C code. The results of this analysis are the center positions and radii of all fibers within the image. The fiber and matrix volume ratios are determined subsequently and mutually compared for different locations across the plates’ thicknesses.

Název v anglickém jazyce

Analysis of the fiber distribution, size, and volume ratio of unidirectional composite plates with different thicknesses

Popis výsledku anglicky

This work focuses on the assessment of real fiber and matrix volume ratios of unidirectional fiber composites which can be used for the design of corresponding numerical models on micro-scale. Samples with polished cross-sections were prepared from three composite plates and they were analyzed using Scanning electron microscopy (SEM) previously. All plates were manufactured from the same prepreg material using autoclave technology. Each plate consisted of different number of plies. Images of various parts of the composite cross-sections obtained with SEM are analyzed using several image processing techniques programmed in Matlab, its Image Processing Toolbox, and C code. The results of this analysis are the center positions and radii of all fibers within the image. The fiber and matrix volume ratios are determined subsequently and mutually compared for different locations across the plates’ thicknesses.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Materiali in Tehnologije

ISSN

1580-2949

e-ISSN

—

Svazek periodika

51

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

SI - Slovinská republika

Počet stran výsledku

6

Strana od-do

59-64

Kód UT WoS článku

000396592900011

EID výsledku v databázi Scopus

—