Standard and scanning laser hardening procedure

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F49777513%3A23640%2F13%3A43920330" target="_blank" >RIV/49777513:23640/13:43920330 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Standard and scanning laser hardening procedure

Popis výsledku v původním jazyce

Laser hardening is one of the most common laser applications. The standard "wide-spot" method uses a direct diode laser with a large spot which moves evenly along a treated area. The scanning method uses a small laser spot in combination with a laser scanning head, which allows very fast laser spot displacements. This technique is based on very fast laser beam sweeping which is perpendicular to main laser treatment trajectory. The fast sweeping beam acts like a continuous wide laser spot. These two laser hardening techniques are described and compared in this contribution. Experimental procedures and results examples are introduced. HPDD (High Power Direct Diode) laser with spot dimensions 6 x 12 mm was used for wide-spot hardening and a solid state disc laser with spot diameter 800 ?m and laser scanning head allowing spot displacement speed up to 21.5 m/s were used for scanning method hardening. Results comparison and main advantages or drawbacks of both the methods are discussed in t

Název v anglickém jazyce

Standard and scanning laser hardening procedure

Popis výsledku anglicky

Laser hardening is one of the most common laser applications. The standard "wide-spot" method uses a direct diode laser with a large spot which moves evenly along a treated area. The scanning method uses a small laser spot in combination with a laser scanning head, which allows very fast laser spot displacements. This technique is based on very fast laser beam sweeping which is perpendicular to main laser treatment trajectory. The fast sweeping beam acts like a continuous wide laser spot. These two laser hardening techniques are described and compared in this contribution. Experimental procedures and results examples are introduced. HPDD (High Power Direct Diode) laser with spot dimensions 6 x 12 mm was used for wide-spot hardening and a solid state disc laser with spot diameter 800 ?m and laser scanning head allowing spot displacement speed up to 21.5 m/s were used for scanning method hardening. Results comparison and main advantages or drawbacks of both the methods are discussed in t

Druh

D - Stať ve sborníku

CEP obor

JK - Koroze a povrchové úpravy materiálu

OECD FORD obor

—

Projekt

<a href="/cs/project/ED2.1.00%2F03.0088" target="_blank" >ED2.1.00/03.0088: Centrum nových technologií a materiálů (CENTEM)</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)<br>S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Conference Metal 2013 proceedings

ISBN

978-80-87294-41-3

ISSN

—

e-ISSN

—

Počet stran výsledku

6

Strana od-do

1009-1014

Název nakladatele

TANGER

Místo vydání

Ostrava

Místo konání akce

Hotel Voroněž I, Brno, Czech Republic

Datum konání akce

15. 5. 2013

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—