Three-Point Hitch, Dynamometer for Measuring Tractor-Implement Forces

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60162694%3AG43__%2F25%3A00563803" target="_blank" >RIV/60162694:G43__/25:00563803 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/00027031:_____/24:N0000046 RIV/60460709:41310/24:100752 RIV/68407700:21220/24:00379085

Výsledek na webu

<a href="https://elibrary.asabe.org/abstract.asp?aid=54737&t=3&dabs=Y&redir=&redirType" target="_blank" >https://elibrary.asabe.org/abstract.asp?aid=54737&t=3&dabs=Y&redir=&redirType</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.13031/aea.15731" target="_blank" >10.13031/aea.15731</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Three-Point Hitch, Dynamometer for Measuring Tractor-Implement Forces

Popis výsledku v původním jazyce

Determination of the traction forces between the tractor and its implement is important due to optimal utilization of tractor power and its connected implement, estimation of soil properties or strength, and fatigue studies. The working width of agriculture implements is increasing, which demands higher traction forces. The article presents the design and test in-field measurement of a double-frame dynamometer for the three-point hitch of the tractors, which can measure forces up to 400 kN. The dynamometer is equipped with six force transducers positioned so that force measurement on all axes is possible. The connection of the dynamometer follows the standard ISO 730. The design of the dynamometer and force calculations are presented. The in-field measurement was performed using disc and chisel tillage implements at different tillage depths. The increasing magnitude of the resultant traction force with increasing tillage depth and the effect of the geometry of tillage machines were found.

Název v anglickém jazyce

Three-Point Hitch, Dynamometer for Measuring Tractor-Implement Forces

Popis výsledku anglicky

Determination of the traction forces between the tractor and its implement is important due to optimal utilization of tractor power and its connected implement, estimation of soil properties or strength, and fatigue studies. The working width of agriculture implements is increasing, which demands higher traction forces. The article presents the design and test in-field measurement of a double-frame dynamometer for the three-point hitch of the tractors, which can measure forces up to 400 kN. The dynamometer is equipped with six force transducers positioned so that force measurement on all axes is possible. The connection of the dynamometer follows the standard ISO 730. The design of the dynamometer and force calculations are presented. The in-field measurement was performed using disc and chisel tillage implements at different tillage depths. The increasing magnitude of the resultant traction force with increasing tillage depth and the effect of the geometry of tillage machines were found.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

40500 - Other agricultural sciences

Projekt

—

Návaznosti

V - Vyzkumna aktivita podporovana z jinych verejnych zdroju

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Applied Engineering in Agriculture

ISSN

0883-8542

e-ISSN

1943-7838

Svazek periodika

40

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

8

Strana od-do

303-310

Kód UT WoS článku

001327158500006

EID výsledku v databázi Scopus

—