Kalibrace čidla náklonu pro měření průchodnosti materiálu pomocí nárazové desky.

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F04%3A8344" target="_blank" >RIV/60460709:41310/04:8344 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

čeština

Název v původním jazyce

Kalibrace čidla náklonu pro měření průchodnosti materiálu pomocí nárazové desky.

Popis výsledku v původním jazyce

Impact plate for the instantaneous material feed rate measurement during the work of rotary mowing machine was developed on the Department of Agricultural Machines in collaboration with the Department of Machines Utilization. On the base of carried out tests under laboratory conditions it is possible to recommend this device for infield evaluation. It was find during laboratory tests that the slope of impact plate influence accuracy of the measurements. The slope of impact plate can be changed during the work of the machine under normal working conditions (for example harvest of inclined fields etc.). It was necessary to equip measurement device by slope sensor. Slope sensor works on the principle of pendulum moved in oil reservoir. For adequate correction of signals from impact plate it was necessary to understand the influence of the different slope angle to these signals. It was find during our measurements that in the range of slope between ?350 and +350 the influence of the slope

Název v anglickém jazyce

Calibration of Slope Sensor for Material Feed Rate Measurement by means of Impact Plate.

Popis výsledku anglicky

Impact plate for the instantaneous material feed rate measurement during the work of rotary mowing machine was developed on the Department of Agricultural Machines in collaboration with the Department of Machines Utilization. On the base of carried out tests under laboratory conditions it is possible to recommend this device for infield evaluation. It was find during laboratory tests that the slope of impact plate influence accuracy of the measurements. The slope of impact plate can be changed during the work of the machine under normal working conditions (for example harvest of inclined fields etc.). It was necessary to equip measurement device by slope sensor. Slope sensor works on the principle of pendulum moved in oil reservoir. For adequate correction of signals from impact plate it was necessary to understand the influence of the different slope angle to these signals. It was find during our measurements that in the range of slope between ?350 and +350 the influence of the slope

Druh

D - Stať ve sborníku

CEP obor

GA - Zemědělská ekonomie

OECD FORD obor

—

Projekt

—

Návaznosti

Z - Vyzkumny zamer (s odkazem do CEZ)

Rok uplatnění

2004

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Informačné Technológie v Manažmentě Výrobných Systémov.

ISBN

80-8069-363-3

ISSN

—

e-ISSN

—

Počet stran výsledku

1

Strana od-do

40-40

Název nakladatele

SPU Nitra

Místo vydání

Nitra, Slovensko

Místo konání akce

SPU Nitra

Datum konání akce

20. 5. 2004

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—