Measurement of Mixture Homogeneity in Direct Injection Systems

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F09%3A27917" target="_blank" >RIV/60460709:41310/09:27917 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Measurement of Mixture Homogeneity in Direct Injection Systems

Popis výsledku v původním jazyce

Direct injection systems have been developed in recent years to enhance the feasibility of this technology for site-specific on-field pesticide application, to reduce environmental pollution, and to ensure operator's safety and comfort. The injection ofconcentrated pesticides downstream of the water tank demands additional features for mixture homogenization. To evaluate the system's mixing properties, a decolorization method and a new sensor for mixture quality measurement at the nozzle were developedand tested. Results showed that the sensor and the method described in this work were adequate for determining the homogeneity of the mixture during injection. Different mixing chamber settings were tested with and without a KMS static mixer. The results indicated the necessity of a mixing device for direct injection systems with short lag times. For a static mixer, the impacts of the mixer position, mixer length, additive viscosity, and mixing ratio were tested. The 12 L/D KMS static m

Název v anglickém jazyce

Measurement of Mixture Homogeneity in Direct Injection Systems

Popis výsledku anglicky

Direct injection systems have been developed in recent years to enhance the feasibility of this technology for site-specific on-field pesticide application, to reduce environmental pollution, and to ensure operator's safety and comfort. The injection ofconcentrated pesticides downstream of the water tank demands additional features for mixture homogenization. To evaluate the system's mixing properties, a decolorization method and a new sensor for mixture quality measurement at the nozzle were developedand tested. Results showed that the sensor and the method described in this work were adequate for determining the homogeneity of the mixture during injection. Different mixing chamber settings were tested with and without a KMS static mixer. The results indicated the necessity of a mixing device for direct injection systems with short lag times. For a static mixer, the impacts of the mixer position, mixer length, additive viscosity, and mixing ratio were tested. The 12 L/D KMS static m

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

GA - Zemědělská ekonomie

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2009

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Transactions of the ASABE

ISSN

0001-2351

e-ISSN

—

Svazek periodika

52

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

6

Strana od-do

—

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—