Use of combined pneumatic conveying in the processing of granular waste materials

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F15%3A67693" target="_blank" >RIV/60460709:41310/15:67693 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Use of combined pneumatic conveying in the processing of granular waste materials

Popis výsledku v původním jazyce

This paper focuses on the structural design, verification and operational functions of combined pneumatic and mechanical transport systems in processing granular materials. A pilot plant was designed in laboratory conditions, and the combined pneumatic and mechanical transport system was tested in operation. Subsequently, transport possibilities for granular waste materials, which varied in size and specific particle weight, were evaluated. A combined pneumatic and mechanical transport system was designed as a transport line for pneumatic conveying at low pressure in combination with a mechanical towing component. The combination of both modes was designed so that the towing component in the form of an axis-less helix was inserted into the conveying pipe. Transport efficiency was monitored by comparing common pneumatic transport and combined pneumatic transport (pneumatic and mechanical transport). Both systems were tested under the same operating conditions with various granular waste

Název v anglickém jazyce

Use of combined pneumatic conveying in the processing of granular waste materials

Popis výsledku anglicky

This paper focuses on the structural design, verification and operational functions of combined pneumatic and mechanical transport systems in processing granular materials. A pilot plant was designed in laboratory conditions, and the combined pneumatic and mechanical transport system was tested in operation. Subsequently, transport possibilities for granular waste materials, which varied in size and specific particle weight, were evaluated. A combined pneumatic and mechanical transport system was designed as a transport line for pneumatic conveying at low pressure in combination with a mechanical towing component. The combination of both modes was designed so that the towing component in the form of an axis-less helix was inserted into the conveying pipe. Transport efficiency was monitored by comparing common pneumatic transport and combined pneumatic transport (pneumatic and mechanical transport). Both systems were tested under the same operating conditions with various granular waste

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JR - Ostatní strojírenství

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2015

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Agronomy Research

ISSN

1406-894X

e-ISSN

—

Svazek periodika

13

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

6

Strana od-do

83-88

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—