Analysis of rapid temperature changes

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F16%3A70471" target="_blank" >RIV/60460709:41310/16:70471 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Analysis of rapid temperature changes

Popis výsledku v původním jazyce

The analysis of rapid temperature changes in the dynamic system is described in the paper. Temperature changes are in range of tens of milliseconds. The sensor we used has a significant influence on the dynamic system. In these cases we need to use thermocouples that have appropriate transfer characteristics and can be manufactured with a low time constant. The time constant directly corresponds with weight and size of the sensor. The quality factor is usually in a range between 0.98 and 0.995. Information about the temperature course is particularly important in the field of dynamic systems, e.g. agricultural machines where the switching components are overloaded by pulse switching of technology systems. For the object analysis we use the thermocouples with diameter 0.012 mm with non-encapsulated finish and 0.12 mm with suppression of interference impact and comparative temperature fluctuation. For the analysis of dynamic temperature changes we conduct a measurement with a load factor change, which

Název v anglickém jazyce

Analysis of rapid temperature changes

Popis výsledku anglicky

The analysis of rapid temperature changes in the dynamic system is described in the paper. Temperature changes are in range of tens of milliseconds. The sensor we used has a significant influence on the dynamic system. In these cases we need to use thermocouples that have appropriate transfer characteristics and can be manufactured with a low time constant. The time constant directly corresponds with weight and size of the sensor. The quality factor is usually in a range between 0.98 and 0.995. Information about the temperature course is particularly important in the field of dynamic systems, e.g. agricultural machines where the switching components are overloaded by pulse switching of technology systems. For the object analysis we use the thermocouples with diameter 0.012 mm with non-encapsulated finish and 0.12 mm with suppression of interference impact and comparative temperature fluctuation. For the analysis of dynamic temperature changes we conduct a measurement with a load factor change, which

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JA - Elektronika a optoelektronika, elektrotechnika

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Agronomy Research

ISSN

1406-894X

e-ISSN

—

Svazek periodika

14

Číslo periodika v rámci svazku

3

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

11

Strana od-do

768-778

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—