Investigation on Polymer Composite Materials Wear Reinforced by Microparticles of Jatropha Curcas L. Waste

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F19%3A80310" target="_blank" >RIV/60460709:41310/19:80310 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1088/1757-899X/638/1/012011" target="_blank" >http://dx.doi.org/10.1088/1757-899X/638/1/012011</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1088/1757-899X/638/1/012011" target="_blank" >10.1088/1757-899X/638/1/012011</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Investigation on Polymer Composite Materials Wear Reinforced by Microparticles of Jatropha Curcas L. Waste

Popis výsledku v původním jazyce

The subject of the paper is a research on the wear resistance by friction against loosely fixed abrasive particles on a polymer composite material reinforced by waste microparticles from a pressing process of Jatropha curcas L. seeds with concentration from 5 to 20 wt.%. The seed pressing waste was used in form of Whole seeds cake (WSC), Seed shells (SS) and Seed kernels cake (SKC). The waste, which is difficult to further utilize for its inability to use as feed, arises at the pressing process of Jatropha Curcas L. seeds. A matrix of composite materials was epoxy-based. The wear tests were performed by the device Tester T-07 according to GOST 23,208-79. An addition of the filler significantly increased the wear resistance by friction against a rubber wheel with loosely fixed abrasive particles of sand. The wear resistance was increased up of 69% to 82% at tested polymer composite systems against matrix (resin). Composites materials with the filler Whole seeds cake (WSC) achieved the best results.

Název v anglickém jazyce

Investigation on Polymer Composite Materials Wear Reinforced by Microparticles of Jatropha Curcas L. Waste

Popis výsledku anglicky

The subject of the paper is a research on the wear resistance by friction against loosely fixed abrasive particles on a polymer composite material reinforced by waste microparticles from a pressing process of Jatropha curcas L. seeds with concentration from 5 to 20 wt.%. The seed pressing waste was used in form of Whole seeds cake (WSC), Seed shells (SS) and Seed kernels cake (SKC). The waste, which is difficult to further utilize for its inability to use as feed, arises at the pressing process of Jatropha Curcas L. seeds. A matrix of composite materials was epoxy-based. The wear tests were performed by the device Tester T-07 according to GOST 23,208-79. An addition of the filler significantly increased the wear resistance by friction against a rubber wheel with loosely fixed abrasive particles of sand. The wear resistance was increased up of 69% to 82% at tested polymer composite systems against matrix (resin). Composites materials with the filler Whole seeds cake (WSC) achieved the best results.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20505 - Composites (including laminates, reinforced plastics, cermets, combined natural and synthetic fibre fabrics; filled composites)

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

2019 2nd International Conference on Aeronautical, Aerospace and Mechanical Engineering, AAME 2019

ISBN

—

ISSN

1757-8981

e-ISSN

—

Počet stran výsledku

8

Strana od-do

0-0

Název nakladatele

IOP Conference Series: Materials Science and Engineering

Místo vydání

neuvedeno

Místo konání akce

Prague; Czech Republic

Datum konání akce

26. 7. 2019

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—