The effect of environmental ageing at lower and sub-zero temperatures on the adhesive joint strength

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F20%3A81597" target="_blank" >RIV/60460709:41310/20:81597 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S0143749619302362" target="_blank" >https://www.sciencedirect.com/science/article/pii/S0143749619302362</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.ijadhadh.2019.102487" target="_blank" >10.1016/j.ijadhadh.2019.102487</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The effect of environmental ageing at lower and sub-zero temperatures on the adhesive joint strength

Popis výsledku v původním jazyce

This paper examines the effect of a selected environmental ageing condition, specifically the temperature, on the strength of adhesive joints. The joint specimens were formed with EN AW 2024 aluminium alloy sheet adherends bonded with three types of epoxy resin compounds. A novelty in the research is the use of a combination of various types of epoxy resins based on Bisphenol A and an amine curing agent dedicated for operating at lower or sub-zero temperatures. The curing conditions for all the assembled adhesive joints were identical, e.g.temperature 24 to 26 degree C, relative humidity 21 percent, curing time 7 days. The adhesive joints were subsequently subjected to environmental ageing at lower and sub-zero temperatures The single-lap adhesive joint specimens aged at lower and sub-zero temperatures were placed in the SH 661 temperature and humidity chamber. The reference specimens were subjected to ageing at ambient temperature in laboratory conditions. Upon completion of the ageing cycle, all a

Název v anglickém jazyce

The effect of environmental ageing at lower and sub-zero temperatures on the adhesive joint strength

Popis výsledku anglicky

This paper examines the effect of a selected environmental ageing condition, specifically the temperature, on the strength of adhesive joints. The joint specimens were formed with EN AW 2024 aluminium alloy sheet adherends bonded with three types of epoxy resin compounds. A novelty in the research is the use of a combination of various types of epoxy resins based on Bisphenol A and an amine curing agent dedicated for operating at lower or sub-zero temperatures. The curing conditions for all the assembled adhesive joints were identical, e.g.temperature 24 to 26 degree C, relative humidity 21 percent, curing time 7 days. The adhesive joints were subsequently subjected to environmental ageing at lower and sub-zero temperatures The single-lap adhesive joint specimens aged at lower and sub-zero temperatures were placed in the SH 661 temperature and humidity chamber. The reference specimens were subjected to ageing at ambient temperature in laboratory conditions. Upon completion of the ageing cycle, all a

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20301 - Mechanical engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2020

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES

ISSN

0143-7496

e-ISSN

1879-0127

Svazek periodika

97

Číslo periodika v rámci svazku

102487

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

9

Strana od-do

0-0

Kód UT WoS článku

000514024200015

EID výsledku v databázi Scopus

2-s2.0-85075447471