Measurement of static forces up to 50 N using piezo ceramics PZK 850

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F21%3A87124" target="_blank" >RIV/60460709:41310/21:87124 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S0263224121000658" target="_blank" >https://www.sciencedirect.com/science/article/pii/S0263224121000658</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.measurement.2021.109033" target="_blank" >10.1016/j.measurement.2021.109033</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Measurement of static forces up to 50 N using piezo ceramics PZK 850

Popis výsledku v původním jazyce

The article deals with a piezoelectric force sensor, that bases on the use of piezo ceramics PZK 850. These types of sensors were used due to characteristic of the piezo-material (i.e. crystal) particularly for dynamic force measurement only. The developed sensor is suitable to measure static forces up to 50 N. the principle of the measurement of static forces bases on the crystal vibration being damped with the acting static force, whereby corresponding resonance frequencies are determined. The article describes the physical principle of the operation and the technical design of the sensor. there are presented two slightly different variations of the sensor. Further there are stated basic calculations of the sensor parameters and of the corresponding resonance frequencies. Finally, individual force-voltage characteristics are determined and respective results and possible use of such types of sensors are discussed.

Název v anglickém jazyce

Measurement of static forces up to 50 N using piezo ceramics PZK 850

Popis výsledku anglicky

The article deals with a piezoelectric force sensor, that bases on the use of piezo ceramics PZK 850. These types of sensors were used due to characteristic of the piezo-material (i.e. crystal) particularly for dynamic force measurement only. The developed sensor is suitable to measure static forces up to 50 N. the principle of the measurement of static forces bases on the crystal vibration being damped with the acting static force, whereby corresponding resonance frequencies are determined. The article describes the physical principle of the operation and the technical design of the sensor. there are presented two slightly different variations of the sensor. Further there are stated basic calculations of the sensor parameters and of the corresponding resonance frequencies. Finally, individual force-voltage characteristics are determined and respective results and possible use of such types of sensors are discussed.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20201 - Electrical and electronic engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2021

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

MEASUREMENT

ISSN

0263-2241

e-ISSN

1873-412X

Svazek periodika

176

Číslo periodika v rámci svazku

May 2021

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

5

Strana od-do

1-5

Kód UT WoS článku

000641453600001

EID výsledku v databázi Scopus

2-s2.0-85101505823