Comparative analysis of compressive strength of epoxy adhesive compounds containing fillers

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41310%2F23%3A100681" target="_blank" >RIV/60460709:41310/23:100681 - isvavai.cz</a>

Výsledek na webu

<a href="https://doi.org/10.1080/00218464.2023.2286295" target="_blank" >https://doi.org/10.1080/00218464.2023.2286295</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1080/00218464.2023.2286295" target="_blank" >10.1080/00218464.2023.2286295</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Comparative analysis of compressive strength of epoxy adhesive compounds containing fillers

Popis výsledku v původním jazyce

The aim of this paper was to analyse the compressive strength and structure of epoxy adhesive compounds containing three different fillers with good thermal conductivity, additionally prepared in variants containing different amounts of these fillers. The base of epoxy adhesive compounds was a mixture of epoxy resin and polyamide curing agent. Three fillers: aluminium, graphite and copper were used in the study. The content of each filler in the epoxy adhesive compounds was 0.5 g, 1 g and 2 g per 100 g of epoxy resin. It allowed to compare the influence of the fillers on the compressive strength between the tested epoxy adhesive compounds and on the structure of the epoxy compounds based on SEM images. To accurately show the differences between the tested samples the one-way ANOVA test and POST-HOC test were used in the study. Descriptive statistic showed that adding the fillers in the amounts used in this research, increased the compressive strength of the epoxy adhesive compounds with the same filler. The results of this analysis showed that the epoxy adhesive compounds containing the aluminium and the copper do not show statistical significance between the amounts of the used filler.

Název v anglickém jazyce

Comparative analysis of compressive strength of epoxy adhesive compounds containing fillers

Popis výsledku anglicky

The aim of this paper was to analyse the compressive strength and structure of epoxy adhesive compounds containing three different fillers with good thermal conductivity, additionally prepared in variants containing different amounts of these fillers. The base of epoxy adhesive compounds was a mixture of epoxy resin and polyamide curing agent. Three fillers: aluminium, graphite and copper were used in the study. The content of each filler in the epoxy adhesive compounds was 0.5 g, 1 g and 2 g per 100 g of epoxy resin. It allowed to compare the influence of the fillers on the compressive strength between the tested epoxy adhesive compounds and on the structure of the epoxy compounds based on SEM images. To accurately show the differences between the tested samples the one-way ANOVA test and POST-HOC test were used in the study. Descriptive statistic showed that adding the fillers in the amounts used in this research, increased the compressive strength of the epoxy adhesive compounds with the same filler. The results of this analysis showed that the epoxy adhesive compounds containing the aluminium and the copper do not show statistical significance between the amounts of the used filler.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20401 - Chemical engineering (plants, products)

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

JOURNAL OF ADHESION

ISSN

0021-8464

e-ISSN

0021-8464

Svazek periodika

101

Číslo periodika v rámci svazku

2023-01-01

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

25

Strana od-do

—

Kód UT WoS článku

001107538200001

EID výsledku v databázi Scopus

2-s2.0-85178303223