Efficiency of sanding belts for Beech and Oak sanding

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F16%3A72087" target="_blank" >RIV/60460709:41320/16:72087 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.15376/biores.11.2.5242-5254" target="_blank" >http://dx.doi.org/10.15376/biores.11.2.5242-5254</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.15376/biores.11.2.5242-5254" target="_blank" >10.15376/biores.11.2.5242-5254</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Efficiency of sanding belts for Beech and Oak sanding

Popis výsledku v původním jazyce

The effects of wear on the performance of sanding belts were determined for European beech (Fagus sylvatica L.) and English oak (Quercus robur). These measurements are presented as a function of the defined sanding time of 480 min on a manual sanding belt machine. Sanding belt pressure on the piece surface (6600, 10400, 14700, and 18600 Pa), sanding direction (cutting speed vector with reference to wood fibers equal to 0, 60 and 90 degrees), wood hydrothermal treatment, and sanding belts from various manufacturers were the variables. The sanding belt wear was monitored by means of specific wood removal rate (g/cm2.min) in 20-min intervals by the means of reference samples with size of 50 x 50 x 50 mm, which were sanded for 1 min. The resulting curves for the sanding belts, as well as the statistical models of the wood removal rate, decreased as a function of the sanding time, described by the function y = a + b.e-ct. This work also describes the impact of wood species, optimum pressure, and grinding

Název v anglickém jazyce

Efficiency of sanding belts for Beech and Oak sanding

Popis výsledku anglicky

The effects of wear on the performance of sanding belts were determined for European beech (Fagus sylvatica L.) and English oak (Quercus robur). These measurements are presented as a function of the defined sanding time of 480 min on a manual sanding belt machine. Sanding belt pressure on the piece surface (6600, 10400, 14700, and 18600 Pa), sanding direction (cutting speed vector with reference to wood fibers equal to 0, 60 and 90 degrees), wood hydrothermal treatment, and sanding belts from various manufacturers were the variables. The sanding belt wear was monitored by means of specific wood removal rate (g/cm2.min) in 20-min intervals by the means of reference samples with size of 50 x 50 x 50 mm, which were sanded for 1 min. The resulting curves for the sanding belts, as well as the statistical models of the wood removal rate, decreased as a function of the sanding time, described by the function y = a + b.e-ct. This work also describes the impact of wood species, optimum pressure, and grinding

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JJ - Ostatní materiály

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2016

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

BioResources

ISSN

1930-2126

e-ISSN

—

Svazek periodika

11

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

13

Strana od-do

5242-5254

Kód UT WoS článku

000375786700165

EID výsledku v databázi Scopus

—