Synergistic Effects of Impregnation Agents Used in Plywood Production Relative to the Shear Strength of Bonded Joints
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F18%3A78774" target="_blank" >RIV/60460709:41320/18:78774 - isvavai.cz</a>
Výsledek na webu
<a href="http://dx.doi.org/10.15376/biores.13.4.7232-7243" target="_blank" >http://dx.doi.org/10.15376/biores.13.4.7232-7243</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.15376/biores.13.4.7232-7243" target="_blank" >10.15376/biores.13.4.7232-7243</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Synergistic Effects of Impregnation Agents Used in Plywood Production Relative to the Shear Strength of Bonded Joints
Popis výsledku v původním jazyce
The main objective of this research was to analyse the synergistic effects of impregnation agents that are most commonly used in plywood production on the strength of bonded joints. Two water-based impregnations (Teknol aqua 1410-01 and Cetol WV 885 BPD+) and one solvent-based impregnation (Gori 605) were used in this study. The tested adhesives were polyvinyl acetate (PVAC) ADHESIVE 3384 (1-component PVAC adhesive), EPI (emulsion polymer isocyanate) system 1920/1993, and polyurethane (PUR) 1968 (1-component PUR adhesive). Test specimens were made from European beech timber (Fagus sylvatica L.) for plywood production according to EN 205 (2017). Individual tests were conducted according to EN 204 (2001) for PVAC adhesives, and according to EN 12765 (2001) for PUR adhesives. Although the effect of impregnation on bond strength was demonstrated, it was different depending on the type of adhesive. A clear positive synergistic effect on the bond strength was shown for isocyanate-based adhesives in almost
Název v anglickém jazyce
Synergistic Effects of Impregnation Agents Used in Plywood Production Relative to the Shear Strength of Bonded Joints
Popis výsledku anglicky
The main objective of this research was to analyse the synergistic effects of impregnation agents that are most commonly used in plywood production on the strength of bonded joints. Two water-based impregnations (Teknol aqua 1410-01 and Cetol WV 885 BPD+) and one solvent-based impregnation (Gori 605) were used in this study. The tested adhesives were polyvinyl acetate (PVAC) ADHESIVE 3384 (1-component PVAC adhesive), EPI (emulsion polymer isocyanate) system 1920/1993, and polyurethane (PUR) 1968 (1-component PUR adhesive). Test specimens were made from European beech timber (Fagus sylvatica L.) for plywood production according to EN 205 (2017). Individual tests were conducted according to EN 204 (2001) for PVAC adhesives, and according to EN 12765 (2001) for PUR adhesives. Although the effect of impregnation on bond strength was demonstrated, it was different depending on the type of adhesive. A clear positive synergistic effect on the bond strength was shown for isocyanate-based adhesives in almost
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
20502 - Paper and wood
Návaznosti výsledku
Projekt
—
Návaznosti
S - Specificky vyzkum na vysokych skolach
Ostatní
Rok uplatnění
2018
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
BioResources
ISSN
1930-2126
e-ISSN
—
Svazek periodika
13
Číslo periodika v rámci svazku
4
Stát vydavatele periodika
CZ - Česká republika
Počet stran výsledku
12
Strana od-do
7232-7243
Kód UT WoS článku
000454215100006
EID výsledku v databázi Scopus
—