Haptic and Aesthetic Properties of Heat-Treated Modified Birch Wood
Identifikátory výsledku
Kód výsledku v IS VaVaI
<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F21%3A89654" target="_blank" >RIV/60460709:41320/21:89654 - isvavai.cz</a>
Výsledek na webu
<a href="https://www.mdpi.com/1999-4907/12/8/1081" target="_blank" >https://www.mdpi.com/1999-4907/12/8/1081</a>
DOI - Digital Object Identifier
<a href="http://dx.doi.org/10.3390/f12081081" target="_blank" >10.3390/f12081081</a>
Alternativní jazyky
Jazyk výsledku
angličtina
Název v původním jazyce
Haptic and Aesthetic Properties of Heat-Treated Modified Birch Wood
Popis výsledku v původním jazyce
This paper deals with the effect of heat treatment on the selected physical properties of birch wood. Five stages of heat treatment were used, ranging from 160 degrees C to 200 degrees C, in 10 degrees C increments, having a peak treatment duration of 3 h for each level. Primarily, changes in thermal characteristics, namely conductivity, diffusivity, effusivity, volume heat capacity, changes in colour and gloss parameters, mass loss due to modification and different moisture content in wood under given equilibrium climatic conditions, were monitored. The ISOMET 2114 analyser was used to measure the thermal characteristics. The measurement principle of this analyser is based on the analysis of the thermal response of the analysed material to pulses of heat flow. Measurements of colour, gloss, density and moisture content were carried out according to harmonised EN standards. The aim was to experimentally verify the more or less generally known more positive perception of heat-treated wood, both by tou
Název v anglickém jazyce
Haptic and Aesthetic Properties of Heat-Treated Modified Birch Wood
Popis výsledku anglicky
This paper deals with the effect of heat treatment on the selected physical properties of birch wood. Five stages of heat treatment were used, ranging from 160 degrees C to 200 degrees C, in 10 degrees C increments, having a peak treatment duration of 3 h for each level. Primarily, changes in thermal characteristics, namely conductivity, diffusivity, effusivity, volume heat capacity, changes in colour and gloss parameters, mass loss due to modification and different moisture content in wood under given equilibrium climatic conditions, were monitored. The ISOMET 2114 analyser was used to measure the thermal characteristics. The measurement principle of this analyser is based on the analysis of the thermal response of the analysed material to pulses of heat flow. Measurements of colour, gloss, density and moisture content were carried out according to harmonised EN standards. The aim was to experimentally verify the more or less generally known more positive perception of heat-treated wood, both by tou
Klasifikace
Druh
J<sub>imp</sub> - Článek v periodiku v databázi Web of Science
CEP obor
—
OECD FORD obor
40102 - Forestry
Návaznosti výsledku
Projekt
<a href="/cs/project/EF16_019%2F0000803" target="_blank" >EF16_019/0000803: Excelentní Výzkum jako podpora Adaptace lesnictví a dřevařství na globální změnu a 4. průmyslovou revoluci</a><br>
Návaznosti
P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)
Ostatní
Rok uplatnění
2021
Kód důvěrnosti údajů
S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů
Údaje specifické pro druh výsledku
Název periodika
FORESTS
ISSN
1999-4907
e-ISSN
—
Svazek periodika
12
Číslo periodika v rámci svazku
8
Stát vydavatele periodika
CZ - Česká republika
Počet stran výsledku
20
Strana od-do
1-20
Kód UT WoS článku
000689235900001
EID výsledku v databázi Scopus
2-s2.0-85113714067