Bonding Characteristics of CLT Made from Silver Birch (Betula pendula Roth.), European Aspen (Populus tremula L.) and Norway Spruce (Picea abies (L.) H. Karst.) Wood

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F24%3A100392" target="_blank" >RIV/60460709:41320/24:100392 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.3390/f15091656" target="_blank" >http://dx.doi.org/10.3390/f15091656</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/f15091656" target="_blank" >10.3390/f15091656</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Bonding Characteristics of CLT Made from Silver Birch (Betula pendula Roth.), European Aspen (Populus tremula L.) and Norway Spruce (Picea abies (L.) H. Karst.) Wood

Popis výsledku v původním jazyce

This paper deals with the bonding characteristics of cross-laminated timber (CLT) panels made of Silver birch (Betula pendula Roth.), European aspen (Populus tremula L.), and Norway spruce (Picea abies (L.) H. Karst.) wood. Three-layered single-species CLT panels were manufactured using birch, aspen, and spruce lamellae bonded with a one-component polyurethane (PUR) adhesive. Spruce CLT panels were used as reference. The bonding characteristics of CLT were assessed based on bond shear strength, total and maximum delamination, and wood failure percentage. The reference spruce CLT met both criteria (Delam(tot) <= 10%, Delam(max) <= 40%) for passing the delamination test, where up to 80% of the test samples passed. The aspen and birch CLTs met the criterion for maximum delamination (26.5% and 33.2%, respectively), but exceeded the maximum allowed value for total delamination (12.7% and 13.2%, respectively). However, the minimum requirement of 70% wood failure percentage (WFP) was met for all CLT types, with aspen CLTs achieving 83.7% and birch CLTs 76.9%. The spruce CLTs achieved an average bond shear strength of 1.9 N/mm(2), while both hardwood CLTs had significantly higher values, with the aspen CLT at 3.3 N/mm(2) and the birch CLT at up to 3.9 N/mm(2). Based on the results obtained, it can be concluded that cross-laminated timber (CLT) made from hardwoods like aspen and birch is suitable for environments with low humidity fluctuations.

Název v anglickém jazyce

Bonding Characteristics of CLT Made from Silver Birch (Betula pendula Roth.), European Aspen (Populus tremula L.) and Norway Spruce (Picea abies (L.) H. Karst.) Wood

Popis výsledku anglicky

This paper deals with the bonding characteristics of cross-laminated timber (CLT) panels made of Silver birch (Betula pendula Roth.), European aspen (Populus tremula L.), and Norway spruce (Picea abies (L.) H. Karst.) wood. Three-layered single-species CLT panels were manufactured using birch, aspen, and spruce lamellae bonded with a one-component polyurethane (PUR) adhesive. Spruce CLT panels were used as reference. The bonding characteristics of CLT were assessed based on bond shear strength, total and maximum delamination, and wood failure percentage. The reference spruce CLT met both criteria (Delam(tot) <= 10%, Delam(max) <= 40%) for passing the delamination test, where up to 80% of the test samples passed. The aspen and birch CLTs met the criterion for maximum delamination (26.5% and 33.2%, respectively), but exceeded the maximum allowed value for total delamination (12.7% and 13.2%, respectively). However, the minimum requirement of 70% wood failure percentage (WFP) was met for all CLT types, with aspen CLTs achieving 83.7% and birch CLTs 76.9%. The spruce CLTs achieved an average bond shear strength of 1.9 N/mm(2), while both hardwood CLTs had significantly higher values, with the aspen CLT at 3.3 N/mm(2) and the birch CLT at up to 3.9 N/mm(2). Based on the results obtained, it can be concluded that cross-laminated timber (CLT) made from hardwoods like aspen and birch is suitable for environments with low humidity fluctuations.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

40100 - Agriculture, Forestry, and Fisheries

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

FORESTS

ISSN

1999-4907

e-ISSN

1999-4907

Svazek periodika

15

Číslo periodika v rámci svazku

9.0

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

13

Strana od-do

1-13

Kód UT WoS článku

001326533800001

EID výsledku v databázi Scopus

2-s2.0-85204933912