Life cycle assessment approach of silviculture and timber harvesting of Norway spruce - a case study in the Czech Republic

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60460709%3A41320%2F24%3A100499" target="_blank" >RIV/60460709:41320/24:100499 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.3389/ffgc.2024.1276740" target="_blank" >http://dx.doi.org/10.3389/ffgc.2024.1276740</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3389/ffgc.2024.1276740" target="_blank" >10.3389/ffgc.2024.1276740</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Life cycle assessment approach of silviculture and timber harvesting of Norway spruce - a case study in the Czech Republic

Popis výsledku v původním jazyce

Compared to other sectors, the long rotation period in forest management makes it difficult to carry out a life cycle assessment (LCA). Data collection is not possible in a short time frame but would require decades. For this reason, forestry is often forced to rely on secondary data. To address this challenge, environmental impacts of the forestry sector in the Czech Republic were investigated according to the value chain corresponding to silvicultural and harvesting processes, without any further wood use options. The methodological procedure is based on the ISO 14040 and 14,044 standards, using SimaPro, an LCA software. The study was carried out in four phases of LCA in the scope of cradle-to-gate and focused on the early stages of the product life cycle. The system boundaries were set up to include seed collection, seedling production, establishment and tending of young forest stands up to 20 years of age, thinning, harvesting, maintenance of roads and extraction trails, with the endpoint is the hauling place. Three scenarios have been defined that differ in the method of harvesting. Scenario I- chainsaw felling, horse extraction. Scenario II- chainsaw (90% of hours worked) and harvester (10% of hour-worked), tractor extraction. Scenario III- chainsaw (23% of hour-worked) and harvester (77% of hour-worked), extraction by a tractor with a winch. The results show that the maintenance of the forest road network holds a significant share of the overall environmental impact of forest management. Other significant consequences are associated with timber harvesting. These impacts vary considerably depending on the mechanical equipment used. The highest impact was recorded for the third scenario, still, it is practically the most often applied, as it is the most cost-effective. The results show the need to optimize forest management practices in the future both from an economic and environmental point of view. The work on the life cycle assessment was particularly challenging because the silviculture and harvesting of raw timber involve 20 production operations. This research was based on long-term knowledge of forest typology, forest management planning, forest economics, experience with forest technologies, and regulatory measures. Thus, the findings serve for further analysis of LCA in timber production, and future analysis for other forest ecosystem services.

Název v anglickém jazyce

Life cycle assessment approach of silviculture and timber harvesting of Norway spruce - a case study in the Czech Republic

Popis výsledku anglicky

Compared to other sectors, the long rotation period in forest management makes it difficult to carry out a life cycle assessment (LCA). Data collection is not possible in a short time frame but would require decades. For this reason, forestry is often forced to rely on secondary data. To address this challenge, environmental impacts of the forestry sector in the Czech Republic were investigated according to the value chain corresponding to silvicultural and harvesting processes, without any further wood use options. The methodological procedure is based on the ISO 14040 and 14,044 standards, using SimaPro, an LCA software. The study was carried out in four phases of LCA in the scope of cradle-to-gate and focused on the early stages of the product life cycle. The system boundaries were set up to include seed collection, seedling production, establishment and tending of young forest stands up to 20 years of age, thinning, harvesting, maintenance of roads and extraction trails, with the endpoint is the hauling place. Three scenarios have been defined that differ in the method of harvesting. Scenario I- chainsaw felling, horse extraction. Scenario II- chainsaw (90% of hours worked) and harvester (10% of hour-worked), tractor extraction. Scenario III- chainsaw (23% of hour-worked) and harvester (77% of hour-worked), extraction by a tractor with a winch. The results show that the maintenance of the forest road network holds a significant share of the overall environmental impact of forest management. Other significant consequences are associated with timber harvesting. These impacts vary considerably depending on the mechanical equipment used. The highest impact was recorded for the third scenario, still, it is practically the most often applied, as it is the most cost-effective. The results show the need to optimize forest management practices in the future both from an economic and environmental point of view. The work on the life cycle assessment was particularly challenging because the silviculture and harvesting of raw timber involve 20 production operations. This research was based on long-term knowledge of forest typology, forest management planning, forest economics, experience with forest technologies, and regulatory measures. Thus, the findings serve for further analysis of LCA in timber production, and future analysis for other forest ecosystem services.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

40100 - Agriculture, Forestry, and Fisheries

Projekt

<a href="/cs/project/EF16_019%2F0000803" target="_blank" >EF16_019/0000803: Excelentní Výzkum jako podpora Adaptace lesnictví a dřevařství na globální změnu a 4. průmyslovou revoluci</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2024

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

FRONTIERS IN FORESTS AND GLOBAL CHANGE

ISSN

2624-893X

e-ISSN

2624-893X

Svazek periodika

7

Číslo periodika v rámci svazku

14.0

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

14

Strana od-do

1-14

Kód UT WoS článku

001205086200001

EID výsledku v databázi Scopus

2-s2.0-85190805640