Ceramo-metallic materials of the Ti-B-C and Ti-B-N systems

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F11%3A43892471" target="_blank" >RIV/60461373:22310/11:43892471 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/61389021:_____/11:00370101

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Ceramo-metallic materials of the Ti-B-C and Ti-B-N systems

Popis výsledku v původním jazyce

Products prepared by the sintering of titanium and boron carbide powder and by the sintering of titanium and boron nitride powder were studied. The sintering was performed at 2,000 °C under the pressure of 6 GPa in a high-pressure apparatus of BELT-typewith sufficient holding time to reach thermodynamic equilibrium. The results of chemical and phase composition analyses were compared with thermodynamic prediction of possible reactions in the system. We proved the preferential formation of borides TiB and TiB2 prior to the carbides or nitrides formation. The products, which may be considered Ti-(TiB,TiB2)-TiN or Ti-(TiB,TiB2)-TiC cermets, were analysed in order to determine their microstructure, phase and chemical composition and their influence on mechanical properties such as hardness or elastic modulus. This work precedes similar study which will be performed using the same powders processed by plasma spraying, which enables to stabilize high-temperature phases by rapid cooling.

Název v anglickém jazyce

Ceramo-metallic materials of the Ti-B-C and Ti-B-N systems

Popis výsledku anglicky

Products prepared by the sintering of titanium and boron carbide powder and by the sintering of titanium and boron nitride powder were studied. The sintering was performed at 2,000 °C under the pressure of 6 GPa in a high-pressure apparatus of BELT-typewith sufficient holding time to reach thermodynamic equilibrium. The results of chemical and phase composition analyses were compared with thermodynamic prediction of possible reactions in the system. We proved the preferential formation of borides TiB and TiB2 prior to the carbides or nitrides formation. The products, which may be considered Ti-(TiB,TiB2)-TiN or Ti-(TiB,TiB2)-TiC cermets, were analysed in order to determine their microstructure, phase and chemical composition and their influence on mechanical properties such as hardness or elastic modulus. This work precedes similar study which will be performed using the same powders processed by plasma spraying, which enables to stabilize high-temperature phases by rapid cooling.

Druh

D - Stať ve sborníku

CEP obor

CA - Anorganická chemie

OECD FORD obor

—

Projekt

—

Návaznosti

I - Institucionalni podpora na dlouhodoby koncepcni rozvoj vyzkumne organizace

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Conference proceedings, 20th International Conference on Metallurgy and Materials

ISBN

978-80-87294-24-6

ISSN

—

e-ISSN

—

Počet stran výsledku

4

Strana od-do

122-126

Název nakladatele

TANGER

Místo vydání

Ostrava

Místo konání akce

Brno

Datum konání akce

18. 5. 2011

Typ akce podle státní příslušnosti

WRD - Celosvětová akce

Kód UT WoS článku

—