Amealing of gold nanostructures sputtered on polytetrafluoroethylene

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F11%3A43892597" target="_blank" >RIV/60461373:22310/11:43892597 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1186/1556-276X-6-588" target="_blank" >http://dx.doi.org/10.1186/1556-276X-6-588</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1186/1556-276X-6-588" target="_blank" >10.1186/1556-276X-6-588</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Amealing of gold nanostructures sputtered on polytetrafluoroethylene

Popis výsledku v původním jazyce

Gold nanolayers sputtered on polytetrafluoroethylene (PTFE) surface and their changes induced by post-deposition annealing at 100°C to 300°C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy, electrical sheet resistance by two point technique, zeta potential by electrokinetic analysis and chemical composition by X-ray photoelectron spectroscopy (XPS) in dependence on the gold layer thickness. Transition from discontinuous to continuous gold coverage takes place at the layer thicknesses 10 to 15 nm and this threshold remains practically unchanged after the annealing at the temperatures below 200°C. The annealing at 300°C, however, leads to significant rearrangement of the gold layer and the transition threshold increases to 70 nm. Significant carbon contamination and the presence of oxidized structures on gold-coated samples are observed in XPS spectra. Gold coating leads to a decrease in the sample surface roughness. Annealing at 300°C of

Název v anglickém jazyce

Amealing of gold nanostructures sputtered on polytetrafluoroethylene

Popis výsledku anglicky

Gold nanolayers sputtered on polytetrafluoroethylene (PTFE) surface and their changes induced by post-deposition annealing at 100°C to 300°C are studied. Changes in surface morphology and roughness are examined by atomic force microscopy, electrical sheet resistance by two point technique, zeta potential by electrokinetic analysis and chemical composition by X-ray photoelectron spectroscopy (XPS) in dependence on the gold layer thickness. Transition from discontinuous to continuous gold coverage takes place at the layer thicknesses 10 to 15 nm and this threshold remains practically unchanged after the annealing at the temperatures below 200°C. The annealing at 300°C, however, leads to significant rearrangement of the gold layer and the transition threshold increases to 70 nm. Significant carbon contamination and the presence of oxidized structures on gold-coated samples are observed in XPS spectra. Gold coating leads to a decrease in the sample surface roughness. Annealing at 300°C of

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

CD - Makromolekulární chemie

OECD FORD obor

—

Projekt

Výsledek vznikl pri realizaci vícero projektů. Více informací v záložce Projekty.

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2011

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Nanoscale Research Letters

ISSN

1931-7573

e-ISSN

—

Svazek periodika

6

Číslo periodika v rámci svazku

588

Stát vydavatele periodika

US - Spojené státy americké

Počet stran výsledku

6

Strana od-do

1-6

Kód UT WoS článku

000297496200001

EID výsledku v databázi Scopus

—