Porous alumina and zirconia ceramics with tailored thermal conductivity

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F12%3A43894495" target="_blank" >RIV/60461373:22310/12:43894495 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1088/1742-6596/395/1/012022" target="_blank" >http://dx.doi.org/10.1088/1742-6596/395/1/012022</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1088/1742-6596/395/1/012022" target="_blank" >10.1088/1742-6596/395/1/012022</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Porous alumina and zirconia ceramics with tailored thermal conductivity

Popis výsledku v původním jazyce

The thermal conductivity of porous ceramics can be tailored by slip casting and uniaxial dry pressing, using either fugitive pore formers (saccharides) or partial sintering. Porous alumina and zirconia ceramics have been prepared using appropriate powdertypes (ungranulated for casting, granulated for pressing) and identical firing regimes (but different maximum temperatures in the case of partial sintering). Thermal diffusivities have been measured by the laser- and xenon-flash method and transformed into relative thermal conductivities, which enable a temperature-independent comparison between different materials. While the porosity can be controlled in a similar way for both materials when using pore formers, partial sintering exhibits characteristic differences between alumina and zirconia (for alumina porosities below 45 %, full density above 1600 °C, for zirconia porosities below 60 %, full density above 1300 °C). The different compaction behavior of alumina and zirconia (porosit

Název v anglickém jazyce

Porous alumina and zirconia ceramics with tailored thermal conductivity

Popis výsledku anglicky

The thermal conductivity of porous ceramics can be tailored by slip casting and uniaxial dry pressing, using either fugitive pore formers (saccharides) or partial sintering. Porous alumina and zirconia ceramics have been prepared using appropriate powdertypes (ungranulated for casting, granulated for pressing) and identical firing regimes (but different maximum temperatures in the case of partial sintering). Thermal diffusivities have been measured by the laser- and xenon-flash method and transformed into relative thermal conductivities, which enable a temperature-independent comparison between different materials. While the porosity can be controlled in a similar way for both materials when using pore formers, partial sintering exhibits characteristic differences between alumina and zirconia (for alumina porosities below 45 %, full density above 1600 °C, for zirconia porosities below 60 %, full density above 1300 °C). The different compaction behavior of alumina and zirconia (porosit

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JH - Keramika, žáruvzdorné materiály a skla

OECD FORD obor

—

Projekt

<a href="/cs/project/GAP108%2F12%2F1170" target="_blank" >GAP108/12/1170: Porézní keramika s řízenou elasticitou a tepelnou vodivostí</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2012

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Journal of Physics: Conference Series

ISSN

1742-6596

e-ISSN

—

Svazek periodika

395

Číslo periodika v rámci svazku

neuveden

Stát vydavatele periodika

GB - Spojené království Velké Británie a Severního Irska

Počet stran výsledku

8

Strana od-do

012022," '1"-"8'"

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—