Preparation and characterization of Yb-doped YAG ceramics

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F13%3A43894508" target="_blank" >RIV/60461373:22310/13:43894508 - isvavai.cz</a>

Výsledek na webu

<a href="http://dx.doi.org/10.1016/j.optmat.2012.05.028" target="_blank" >http://dx.doi.org/10.1016/j.optmat.2012.05.028</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.optmat.2012.05.028" target="_blank" >10.1016/j.optmat.2012.05.028</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Preparation and characterization of Yb-doped YAG ceramics

Popis výsledku v původním jazyce

This work presents the results of the preparation of polycrystalline Yb:YAG ceramics for laser sources with dopant concentration from 0 up to 20 at.% via solid state reactive sintering. Samples were prepared via cold isostatic pressing of spray dried mixtures of pure oxide powders with TEOS as a sintering aid. Sintering was conducted under high vacuum and clean atmosphere. Samples with optical transmittance higher than 80 % were prepared and their laser performance was examined. Slope efficiency as highas 73 % and a maximum output power of 6 W were obtained for the sample doped with 10 % Yb. The final microstructure of the prepared samples was analyzed via optical microscopy, scanning and transmission electron microscopy, and EDS.

Název v anglickém jazyce

Preparation and characterization of Yb-doped YAG ceramics

Popis výsledku anglicky

This work presents the results of the preparation of polycrystalline Yb:YAG ceramics for laser sources with dopant concentration from 0 up to 20 at.% via solid state reactive sintering. Samples were prepared via cold isostatic pressing of spray dried mixtures of pure oxide powders with TEOS as a sintering aid. Sintering was conducted under high vacuum and clean atmosphere. Samples with optical transmittance higher than 80 % were prepared and their laser performance was examined. Slope efficiency as highas 73 % and a maximum output power of 6 W were obtained for the sample doped with 10 % Yb. The final microstructure of the prepared samples was analyzed via optical microscopy, scanning and transmission electron microscopy, and EDS.

Druh

J_x - Nezařazeno - Článek v odborném periodiku (Jimp, Jsc a Jost)

CEP obor

JH - Keramika, žáruvzdorné materiály a skla

OECD FORD obor

—

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2013

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Optical Materials

ISSN

0925-3467

e-ISSN

—

Svazek periodika

35

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

NL - Nizozemsko

Počet stran výsledku

6

Strana od-do

798-803

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—