Synthesis of intermetallics in Fe-Al-Si system by mechanical alloying

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F19%3A43917013" target="_blank" >RIV/60461373:22310/19:43917013 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/68378271:_____/19:00505321 RIV/68407700:21340/19:00334010

Výsledek na webu

<a href="https://www.mdpi.com/2075-4701/9/1/20" target="_blank" >https://www.mdpi.com/2075-4701/9/1/20</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.3390/met9010020" target="_blank" >10.3390/met9010020</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Synthesis of intermetallics in Fe-Al-Si system by mechanical alloying

Popis výsledku v původním jazyce

Fe-Al-Si alloys have been recently developed in order to obtain excellent high-temperature mechanical properties and oxidation resistance. However, their production by conventional metallurgical processes is problematic. In this work, an innovative processing method, based on ultra-high energy mechanical alloying, has been tested for the preparation of these alloys. It has been found that the powders of low-silicon alloys (up to 10 wt. %) consist of FeAl phase supersaturated by Si after mechanical alloying. Fe2Al5 phase forms as a transient phase at the initial stage of mechanical alloying. The alloy containing 20 wt. % of Si and 20 wt. % of Al is composed mostly of iron silicides (Fe3Si and FeSi) and FeAl ordered phase. Thermal stability of the mechanically alloyed powders was studied in order to predict the sintering behavior during possible compaction via spark plasma sintering or other methods. The formation of Fe2Al5 phase and Fe3Si or Fe2Al3Si3 phases was detected after annealing depending on the alloy composition. It implies that the powders after mechanical alloying are in a metastable state; therefore, chemical reactions can be expected in the powders during sintering.

Název v anglickém jazyce

Synthesis of intermetallics in Fe-Al-Si system by mechanical alloying

Popis výsledku anglicky

Fe-Al-Si alloys have been recently developed in order to obtain excellent high-temperature mechanical properties and oxidation resistance. However, their production by conventional metallurgical processes is problematic. In this work, an innovative processing method, based on ultra-high energy mechanical alloying, has been tested for the preparation of these alloys. It has been found that the powders of low-silicon alloys (up to 10 wt. %) consist of FeAl phase supersaturated by Si after mechanical alloying. Fe2Al5 phase forms as a transient phase at the initial stage of mechanical alloying. The alloy containing 20 wt. % of Si and 20 wt. % of Al is composed mostly of iron silicides (Fe3Si and FeSi) and FeAl ordered phase. Thermal stability of the mechanically alloyed powders was studied in order to predict the sintering behavior during possible compaction via spark plasma sintering or other methods. The formation of Fe2Al5 phase and Fe3Si or Fe2Al3Si3 phases was detected after annealing depending on the alloy composition. It implies that the powders after mechanical alloying are in a metastable state; therefore, chemical reactions can be expected in the powders during sintering.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

S - Specificky vyzkum na vysokych skolach

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Metals

ISSN

2075-4701

e-ISSN

—

Svazek periodika

9

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

14

Strana od-do

nestránkováno

Kód UT WoS článku

000459738500020

EID výsledku v databázi Scopus

2-s2.0-85059372683