The properties of free-standing epoxy polymer multi-mode optical waveguides

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F19%3A43917021" target="_blank" >RIV/60461373:22310/19:43917021 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/68407700:21230/19:00322625

Výsledek na webu

<a href="https://link.springer.com/content/pdf/10.1007%2Fs00542-018-3960-9.pdf" target="_blank" >https://link.springer.com/content/pdf/10.1007%2Fs00542-018-3960-9.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1007/s00542-018-3960-9" target="_blank" >10.1007/s00542-018-3960-9</a>

Jazyk výsledku

angličtina

Název v původním jazyce

The properties of free-standing epoxy polymer multi-mode optical waveguides

Popis výsledku v původním jazyce

The paper reports on the fabrication and characterisation of free-standing multimode optical epoxy polymer waveguides consisting of a core made of EpoCore and EpoClad polymer cladding and cover protection layers. The 50x50m(2) rectangular waveguides are intended for short-reach optical interconnection and optimised for an operating wavelength of 850nm. The waveguides of the proposed shapes were fabricated by a standard photolithography process on a silicon substrate provided with a Poly(vinyl alcohol) thin layer. The free-standing structure was then achieved by peeling the deposited EpoClad/EpoCore/EpoClad structures of that substrate. The optical scattering losses of the created planar waveguides, measured by the fibre probe technique at 632.8 and 964nm, were 0.30dBcm(-1) at 632.8nm and 0.17dBcm(-1) at 964nm. Propagation optical loss measurements for rectangular waveguides were performed by the cut-back method and the best samples had optical losses below 0.55dBcm(-1) at 850 and 1310nm.

Název v anglickém jazyce

The properties of free-standing epoxy polymer multi-mode optical waveguides

Popis výsledku anglicky

The paper reports on the fabrication and characterisation of free-standing multimode optical epoxy polymer waveguides consisting of a core made of EpoCore and EpoClad polymer cladding and cover protection layers. The 50x50m(2) rectangular waveguides are intended for short-reach optical interconnection and optimised for an operating wavelength of 850nm. The waveguides of the proposed shapes were fabricated by a standard photolithography process on a silicon substrate provided with a Poly(vinyl alcohol) thin layer. The free-standing structure was then achieved by peeling the deposited EpoClad/EpoCore/EpoClad structures of that substrate. The optical scattering losses of the created planar waveguides, measured by the fibre probe technique at 632.8 and 964nm, were 0.30dBcm(-1) at 632.8nm and 0.17dBcm(-1) at 964nm. Propagation optical loss measurements for rectangular waveguides were performed by the cut-back method and the best samples had optical losses below 0.55dBcm(-1) at 850 and 1310nm.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20506 - Coating and films

Projekt

<a href="/cs/project/TH01020276" target="_blank" >TH01020276: Flexibilní 2D a 3D polymerní fotonické struktury</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Microsystem Technologies

ISSN

0946-7076

e-ISSN

—

Svazek periodika

25

Číslo periodika v rámci svazku

1

Stát vydavatele periodika

DE - Spolková republika Německo

Počet stran výsledku

8

Strana od-do

257-264

Kód UT WoS článku

000455501600024

EID výsledku v databázi Scopus

2-s2.0-85047129526