Identification of defects of surface ceramic finishing

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F19%3A43918070" target="_blank" >RIV/60461373:22310/19:43918070 - isvavai.cz</a>

Výsledek na webu

—

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Identification of defects of surface ceramic finishing

Popis výsledku v původním jazyce

The main reason of using surface coatings is, in addition to aesthetic requirements, an increase of the resistance of the surface in corrosive environments. Glazes may be applied to various types of ceramic substrates i.e. chemical reactors, dental implants, ceramic whiteware and tiles, porcelain, insulators, ceramic roofing etc. All these products are expected to be highly resistant to various types of degradation processes such as corrosion by environment or thermal stresses developed during production or usage. Defect formation is the main and the most obvious sign of all these undesirable changes of the ceramic body - surface finishing system. The measurement of thermal expansions of contemporary and historical glaze - ceramic body systems by several types of thermal analyses confirmed that the obtained data are suitable for the calculation of stress relations in real glazed ceramic products. The most common types of historical glaze defects were caused by poor system selection or improper storage conditions.

Název v anglickém jazyce

Identification of defects of surface ceramic finishing

Popis výsledku anglicky

The main reason of using surface coatings is, in addition to aesthetic requirements, an increase of the resistance of the surface in corrosive environments. Glazes may be applied to various types of ceramic substrates i.e. chemical reactors, dental implants, ceramic whiteware and tiles, porcelain, insulators, ceramic roofing etc. All these products are expected to be highly resistant to various types of degradation processes such as corrosion by environment or thermal stresses developed during production or usage. Defect formation is the main and the most obvious sign of all these undesirable changes of the ceramic body - surface finishing system. The measurement of thermal expansions of contemporary and historical glaze - ceramic body systems by several types of thermal analyses confirmed that the obtained data are suitable for the calculation of stress relations in real glazed ceramic products. The most common types of historical glaze defects were caused by poor system selection or improper storage conditions.

Druh

D - Stať ve sborníku

CEP obor

—

OECD FORD obor

20506 - Coating and films

Projekt

<a href="/cs/project/DG18P02OVV028" target="_blank" >DG18P02OVV028: Technologie ošetření a identifikace degradačních procesů keramických nálezů z hradčanských paláců - Metody restaurování a konzervování pórovité i slinuté keramiky a porcelánu</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název statě ve sborníku

Proceedings of the XIIIth International Conference Preparation of Ceramic Materials

ISBN

978-80-553-3314-4

ISSN

—

e-ISSN

—

Počet stran výsledku

5

Strana od-do

89-93

Název nakladatele

Technická univerzita v Košiciach

Místo vydání

Košice

Místo konání akce

Jahodná

Datum konání akce

25. 6. 2019

Typ akce podle státní příslušnosti

EUR - Evropská akce

Kód UT WoS článku

—