Influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43)

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F19%3A43919036" target="_blank" >RIV/60461373:22310/19:43919036 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/00216305:26210/19:PU143911

Výsledek na webu

<a href="https://www.scopus.com/record/display.uri?eid=2-s2.0-85077164160&origin=resultslist&sort=plf-f&src=s&st1=Influence+of+production+parameters+on+the+properties+of+3D+printed+magnesium+alloy+&st2=&sid=6096a535666d0f58fe4df38080a65fad&sot=b&sdt=b&sl=98&s=TITLE-ABS-KEY%28Influence+of+production+parameters+on+the+properties+of+3D+printed+magnesium+alloy+%29&relpos=0&citeCnt=1&searchTerm=" target="_blank" >https://www.scopus.com/record/display.uri?eid=2-s2.0-85077164160&origin=resultslist&sort=plf-f&src=s&st1=Influence+of+production+parameters+on+the+properties+of+3D+printed+magnesium+alloy+&st2=&sid=6096a535666d0f58fe4df38080a65fad&sot=b&sdt=b&sl=98&s=TITLE-ABS-KEY%28Influence+of+production+parameters+on+the+properties+of+3D+printed+magnesium+alloy+%29&relpos=0&citeCnt=1&searchTerm=</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/ujep/343.2019/a/1213-2489/MT/19/4/613" target="_blank" >10.21062/ujep/343.2019/a/1213-2489/MT/19/4/613</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43)

Popis výsledku v původním jazyce

This paper reports on the influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43) produced by the selective laser melting method. We present microstructures and mechanical properties of four selected samples prepared under various production parameters. Optical and scanning electron microscopy together with energy-dispersive X-ray spectrometry were used for microstructure analysis. Porosity was evaluated based on image analysis. To represent differences in mechanical properties, microhardness measurement and compression tests were performed. Based on our observations of microstructure quality and performed tests, the results of the parameter impact study are further applied to the production of products of the required quality

Název v anglickém jazyce

Influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43)

Popis výsledku anglicky

This paper reports on the influence of production parameters on the properties of 3D printed magnesium alloy Mg-4Y-3RE-Zr (WE43) produced by the selective laser melting method. We present microstructures and mechanical properties of four selected samples prepared under various production parameters. Optical and scanning electron microscopy together with energy-dispersive X-ray spectrometry were used for microstructure analysis. Porosity was evaluated based on image analysis. To represent differences in mechanical properties, microhardness measurement and compression tests were performed. Based on our observations of microstructure quality and performed tests, the results of the parameter impact study are further applied to the production of products of the required quality

Druh

J_SC - Článek v periodiku v databázi SCOPUS

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

<a href="/cs/project/FV20232" target="_blank" >FV20232: Biodegradovatelné strukturované implantáty vyrobené metodou 3D tisku kovů</a><br>

Návaznosti

P - Projekt vyzkumu a vyvoje financovany z verejnych zdroju (s odkazem do CEP)

Rok uplatnění

2019

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

—

Svazek periodika

19

Číslo periodika v rámci svazku

4

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

6

Strana od-do

613-618

Kód UT WoS článku

—

EID výsledku v databázi Scopus

2-s2.0-85077164160