Experimental Analysis on the Curing and Adhesive Behaviour of Standard Moisture-cured and Fast-cured Polyurethanes Used in Automotive Industry

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F22%3A43924087" target="_blank" >RIV/60461373:22310/22:43924087 - isvavai.cz</a>

Výsledek na webu

<a href="https://www.journalmt.com/pdfs/mft/2022/02/14.pdf" target="_blank" >https://www.journalmt.com/pdfs/mft/2022/02/14.pdf</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.21062/mft.2022.029" target="_blank" >10.21062/mft.2022.029</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Experimental Analysis on the Curing and Adhesive Behaviour of Standard Moisture-cured and Fast-cured Polyurethanes Used in Automotive Industry

Popis výsledku v původním jazyce

In this paper, the adhesive behaviour of different polyurethane glues was studied and compared. The study was inspired by real conditions in the production of car windows, and it is divided into several parts, which deal with three types of polyurethane adhesives. The first type is a standard one-component polyurethane adhesive, which cures with air humidity. The second type is a one-component polyurethane adhesive with the addition of a curing accelerator. And the third type is a two-component polyurethane adhesive. Adhesive blocks of defined dimensions and plastic parts glued to the glass were used for this experiment to simulate a real product. The influence of temperature and humidity on the curing process was evaluated. The test included measuring the force required to tear the parts from the glass and assessing the type of failure. Based on the achieved results, the adhesives were evaluated regarding their applicability in the real automotive industry and the key properties necessary to maintain the safety and quality of the glued part were determined

Název v anglickém jazyce

Experimental Analysis on the Curing and Adhesive Behaviour of Standard Moisture-cured and Fast-cured Polyurethanes Used in Automotive Industry

Popis výsledku anglicky

In this paper, the adhesive behaviour of different polyurethane glues was studied and compared. The study was inspired by real conditions in the production of car windows, and it is divided into several parts, which deal with three types of polyurethane adhesives. The first type is a standard one-component polyurethane adhesive, which cures with air humidity. The second type is a one-component polyurethane adhesive with the addition of a curing accelerator. And the third type is a two-component polyurethane adhesive. Adhesive blocks of defined dimensions and plastic parts glued to the glass were used for this experiment to simulate a real product. The influence of temperature and humidity on the curing process was evaluated. The test included measuring the force required to tear the parts from the glass and assessing the type of failure. Based on the achieved results, the adhesives were evaluated regarding their applicability in the real automotive industry and the key properties necessary to maintain the safety and quality of the glued part were determined

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

N - Vyzkumna aktivita podporovana z neverejnych zdroju

Rok uplatnění

2022

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Manufacturing Technology

ISSN

1213-2489

e-ISSN

2787-9402

Svazek periodika

22

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

12

Strana od-do

168-179

Kód UT WoS článku

000859956300005

EID výsledku v databázi Scopus

2-s2.0-85130120182