Effects of Cu microalloying on corrosion behaviour of spring steel 54SiCr6

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22310%2F23%3A43928530" target="_blank" >RIV/60461373:22310/23:43928530 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/60461373:22810/23:43928530

Výsledek na webu

<a href="https://www.sciencedirect.com/science/article/pii/S0254058423010313" target="_blank" >https://www.sciencedirect.com/science/article/pii/S0254058423010313</a>

DOI - Digital Object Identifier

<a href="http://dx.doi.org/10.1016/j.matchemphys.2023.128323" target="_blank" >10.1016/j.matchemphys.2023.128323</a>

Jazyk výsledku

angličtina

Název v původním jazyce

Effects of Cu microalloying on corrosion behaviour of spring steel 54SiCr6

Popis výsledku v původním jazyce

Springs made of low-alloy carbon steels are often exposed to the effects of a corrosive environment, such as high humidity and concentration of road salt, rain and snow erosion, temperature fluctuations in combination with dynamic loading and mechanical wear. One of the possibilities to improve their resistance in a corrosive environment is their microalloying by Cr, Ni, Mo or Cu. This study tested the effect of microalloying of 54SiCr6 steel by copper on the corrosion behavior in model rainwater and saltwater. The corrosion resistance of the steel samples was tested using electrochemical tests by measuring the polarization resistance and the anodic parts of the potentiodynamic curves at three different temperatures. The surface of the steel samples was observed using SEM/EDS, surface analysis, and XRD diffraction. The measurement results showed that copper in the amount of approx. 1.5 wt % does not affect the microstructure of the spring steel 54SiCr6 after the heat treatment significantly, but improves the corrosion resistance during short-term exposure in both model rainwater and saltwater.

Název v anglickém jazyce

Effects of Cu microalloying on corrosion behaviour of spring steel 54SiCr6

Popis výsledku anglicky

Springs made of low-alloy carbon steels are often exposed to the effects of a corrosive environment, such as high humidity and concentration of road salt, rain and snow erosion, temperature fluctuations in combination with dynamic loading and mechanical wear. One of the possibilities to improve their resistance in a corrosive environment is their microalloying by Cr, Ni, Mo or Cu. This study tested the effect of microalloying of 54SiCr6 steel by copper on the corrosion behavior in model rainwater and saltwater. The corrosion resistance of the steel samples was tested using electrochemical tests by measuring the polarization resistance and the anodic parts of the potentiodynamic curves at three different temperatures. The surface of the steel samples was observed using SEM/EDS, surface analysis, and XRD diffraction. The measurement results showed that copper in the amount of approx. 1.5 wt % does not affect the microstructure of the spring steel 54SiCr6 after the heat treatment significantly, but improves the corrosion resistance during short-term exposure in both model rainwater and saltwater.

Druh

J_imp - Článek v periodiku v databázi Web of Science

CEP obor

—

OECD FORD obor

20501 - Materials engineering

Projekt

—

Návaznosti

V - Vyzkumna aktivita podporovana z jinych verejnych zdroju

Rok uplatnění

2023

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

MATERIALS CHEMISTRY AND PHYSICS

ISSN

0254-0584

e-ISSN

1879-3312

Svazek periodika

309

Číslo periodika v rámci svazku

November

Stát vydavatele periodika

CH - Švýcarská konfederace

Počet stran výsledku

11

Strana od-do

1-11

Kód UT WoS článku

001065014600001

EID výsledku v databázi Scopus

2-s2.0-85168107768