Continuous testing of carbonate loop in the fluidized bed unit with closed circulation

Kód výsledku v IS VaVaI

<a href="https://www.isvavai.cz/riv?ss=detail&h=RIV%2F60461373%3A22320%2F17%3A43903873" target="_blank" >RIV/60461373:22320/17:43903873 - isvavai.cz</a>

Nalezeny alternativní kódy

RIV/60461373:22350/17:43903873

Výsledek na webu

<a href="http://paliva.vscht.cz/cz/archiv-clanku/detail/36" target="_blank" >http://paliva.vscht.cz/cz/archiv-clanku/detail/36</a>

DOI - Digital Object Identifier

—

Jazyk výsledku

angličtina

Název v původním jazyce

Continuous testing of carbonate loop in the fluidized bed unit with closed circulation

Popis výsledku v původním jazyce

The study describes actual experiences with continuous testing of high temperature CO2 sorption on limestones using a unique pilot laboratory fluidized bed reactor. The article summarizes results obtained after mathematic processing of data, collected during longer term measurements. Experiments with cyclically alternated decarbonation and carbonation phases were performed without shutting down the system. Sorption behavior of tested substrate was compared with the same parameters evaluated using two smaller-scale laboratory apparatuses. One of the laboratory apparatuses had a fixed bed reactor, while the other was equipped with quartz-made fluidized bed adsorber. The effect of different heating rates, applied in the three above mentioned apparatuses, on sample sintering of the sample was discussed and documented by appropriate SEM photos.

Název v anglickém jazyce

Continuous testing of carbonate loop in the fluidized bed unit with closed circulation

Popis výsledku anglicky

The study describes actual experiences with continuous testing of high temperature CO2 sorption on limestones using a unique pilot laboratory fluidized bed reactor. The article summarizes results obtained after mathematic processing of data, collected during longer term measurements. Experiments with cyclically alternated decarbonation and carbonation phases were performed without shutting down the system. Sorption behavior of tested substrate was compared with the same parameters evaluated using two smaller-scale laboratory apparatuses. One of the laboratory apparatuses had a fixed bed reactor, while the other was equipped with quartz-made fluidized bed adsorber. The effect of different heating rates, applied in the three above mentioned apparatuses, on sample sintering of the sample was discussed and documented by appropriate SEM photos.

Druh

J_ost - Ostatní články v recenzovaných periodicích

CEP obor

—

OECD FORD obor

20402 - Chemical process engineering

Projekt

—

Návaznosti

V - Vyzkumna aktivita podporovana z jinych verejnych zdroju

Rok uplatnění

2017

Kód důvěrnosti údajů

S - Úplné a pravdivé údaje o projektu nepodléhají ochraně podle zvláštních právních předpisů

Název periodika

Paliva

ISSN

1804-2058

e-ISSN

—

Svazek periodika

9

Číslo periodika v rámci svazku

2

Stát vydavatele periodika

CZ - Česká republika

Počet stran výsledku

10

Strana od-do

67-76

Kód UT WoS článku

—

EID výsledku v databázi Scopus

—